lkml.org 
[lkml]   [2022]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] media: uvcvideo: Recover stalled ElGato devices
Hi Ricardo,

On Tue, Dec 06, 2022 at 12:15:04AM +0100, Ricardo Ribalda wrote:
> Elgato Cam Link 4k can be in a stalled state if the resolution of
> the external source has changed while the firmware initializes.
> Once in this state, the device is useless until it receives a
> USB reset. It has even been observed that the stalled state will
> continue even after unplugging the device.
>
> lsusb -v
>
> Bus 002 Device 002: ID 0fd9:0066 Elgato Systems GmbH Cam Link 4K
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 3.00
> bDeviceClass 239 Miscellaneous Device
> bDeviceSubClass 2
> bDeviceProtocol 1 Interface Association
> bMaxPacketSize0 9
> idVendor 0x0fd9 Elgato Systems GmbH
> idProduct 0x0066
> bcdDevice 0.00
> iManufacturer 1 Elgato
> iProduct 2 Cam Link 4K
> iSerial 4 0005AC52FE000
> bNumConfigurations 1
>
> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
> ---
> Recover stalled ElGato devices
>
> Just a resend of this hw fix.

Taken in my tree, thanks.

> To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> To: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: linux-media@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
> Cc: Yunke Cao <yunkec@chromium.org>
> ---
> Changes in v4:
> - Add Reviewed-by: Laurent
> - Update error messages (Thanks Laurent!)
> - Swap checks on if (Thanks Laurent)
> - Link to v3: https://lore.kernel.org/r/20220920-resend-elgato-v3-0-57668054127f@chromium.org
>
> Changes in v3:
> - Add Reviewed-by: Sergey
> - Improve identation (Thanks Sergey!)
> - Link to v2: https://lore.kernel.org/r/20220920-resend-elgato-v2-0-06b48b3b486a@chromium.org
>
> Changes in v2:
> - Remove info from lsusb
> - Link to v1: https://lore.kernel.org/r/20220920-resend-elgato-v1-0-8672a2380e3d@chromium.org
> ---
> drivers/media/usb/uvc/uvc_video.c | 24 ++++++++++++++++++++----
> 1 file changed, 20 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
> index 170a008f4006..ba7c159cb2a6 100644
> --- a/drivers/media/usb/uvc/uvc_video.c
> +++ b/drivers/media/usb/uvc/uvc_video.c
> @@ -129,12 +129,13 @@ int uvc_query_ctrl(struct uvc_device *dev, u8 query, u8 unit,
> return -EPIPE;
> }
>
> +static const struct usb_device_id elgato_cam_link_4k = {
> + USB_DEVICE(0x0fd9, 0x0066)
> +};
> +
> static void uvc_fixup_video_ctrl(struct uvc_streaming *stream,
> struct uvc_streaming_control *ctrl)
> {
> - static const struct usb_device_id elgato_cam_link_4k = {
> - USB_DEVICE(0x0fd9, 0x0066)
> - };
> struct uvc_format *format = NULL;
> struct uvc_frame *frame = NULL;
> unsigned int i;
> @@ -297,7 +298,7 @@ static int uvc_get_video_ctrl(struct uvc_streaming *stream,
> dev_err(&stream->intf->dev,
> "Failed to query (%u) UVC %s control : %d (exp. %u).\n",
> query, probe ? "probe" : "commit", ret, size);
> - ret = -EIO;
> + ret = (ret == -EPROTO) ? -EPROTO : -EIO;
> goto out;
> }
>
> @@ -2121,6 +2122,21 @@ int uvc_video_init(struct uvc_streaming *stream)
> * request on the probe control, as required by the UVC specification.
> */
> ret = uvc_get_video_ctrl(stream, probe, 1, UVC_GET_CUR);
> +
> + /*
> + * Elgato Cam Link 4k can be in a stalled state if the resolution of
> + * the external source has changed while the firmware initializes.
> + * Once in this state, the device is useless until it receives a
> + * USB reset. It has even been observed that the stalled state will
> + * continue even after unplugging the device.
> + */
> + if (ret == -EPROTO &&
> + usb_match_one_id(stream->dev->intf, &elgato_cam_link_4k)) {
> + dev_err(&stream->intf->dev, "Elgato Cam Link 4K firmware crash detected\n");
> + dev_err(&stream->intf->dev, "Resetting the device, unplug and replug to recover\n");
> + usb_reset_device(stream->dev->udev);
> + }
> +
> if (ret < 0)
> return ret;
>
>
> ---
> base-commit: 521a547ced6477c54b4b0cc206000406c221b4d6
> change-id: 20220920-resend-elgato-a845482bdd02

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2023-03-26 23:22    [W:2.776 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site