lkml.org 
[lkml]   [2022]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 7/7] riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree
On Fri, Dec 23, 2022 at 11:12:34AM +0800, Hal Feng wrote:
> On Tue, 20 Dec 2022 21:26:07 +0000, Conor Dooley wrote:
> > On Tue, Dec 20, 2022 at 09:12:47AM +0800, Hal Feng wrote:
> > > From: Emil Renner Berthing <kernel@esmil.dk>
> > >
> > > Add a minimal device tree for StarFive JH7110 VisionFive 2 board
> > > which has version A and version B. Support booting and basic
> > > clock/reset/pinctrl/uart drivers.
> > >
> > > Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> > > Co-developed-by: Jianlong Huang <jianlong.huang@starfivetech.com>
> > > Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
> > > Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
> > > Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
> > > ---

> > > diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> > > new file mode 100644
> > > index 000000000000..c60280b89c73
> > > --- /dev/null
> > > +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> > > @@ -0,0 +1,111 @@
> > > +// SPDX-License-Identifier: GPL-2.0 OR MIT
> > > +/*
> > > + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> > > + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
> > > + */
> > > +
> > > +/dts-v1/;
> > > +#include "jh7110.dtsi"
> > > +#include "jh7110-pinfunc.h"
> > > +#include <dt-bindings/gpio/gpio.h>
> > > +
> > > +/ {
> > > + aliases {
> > > + serial0 = &uart0;
> > > + };
> > > +
> > > + chosen {
> > > + stdout-path = "serial0:115200n8";
> > > + };
> > > +
> > > + cpus {
> > > + timebase-frequency = <4000000>;
> > > + };
> > > +
> > > + memory@40000000 {
> > > + device_type = "memory";
> > > + reg = <0x0 0x40000000 0x1 0x0>;
> >
> > Is this a good idea when you have SKUs with 2, 4 & 8 GiB of DDR?
>
> The VisionFive 2 board only has 4GB version and 8GB version now. Before
> linux startup, we will change this property in dtb through u-boot to
> make sure the board can boot up with the correct memory size.

Ah I see. Thanks.

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2023-03-26 23:22    [W:0.092 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site