lkml.org 
[lkml]   [2022]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] irqchip: gic-v3: Handle failure case of CPU enters low power state
On Wed, Dec 28, 2022 at 11:14:11AM +0000, Marc Zyngier wrote:
> On Tue, 27 Dec 2022 10:36:38 +0000,
> Pavan Kondeti <quic_pkondeti@quicinc.com> wrote:
> >
> > Hi Yogesh,
> >
> > On Fri, Dec 23, 2022 at 12:05:40AM +0530, Yogesh Lal wrote:
> > > When CPU enter in low power mode it disable the redistributor and
> > > Group1 interrupts. And re-initialise the system registers on wakeup.
> > >
> > > But in case of failure to enter low power mode need to enable
> > > the redistributor and Group1 interrupts.
> > >
> > > Signed-off-by: Yogesh Lal <quic_ylal@quicinc.com>
> > > ---
> > > drivers/irqchip/irq-gic-v3.c | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
> > > index 997104d..4904f00 100644
> > > --- a/drivers/irqchip/irq-gic-v3.c
> > > +++ b/drivers/irqchip/irq-gic-v3.c
> > > @@ -1376,7 +1376,7 @@ static int gic_retrigger(struct irq_data *data)
> > > static int gic_cpu_pm_notifier(struct notifier_block *self,
> > > unsigned long cmd, void *v)
> > > {
> > > - if (cmd == CPU_PM_EXIT) {
> > > + if (cmd == CPU_PM_EXIT || cmd == CPU_PM_ENTER_FAILED) {
> > > if (gic_dist_security_disabled())
> > > gic_enable_redist(true);
> > > gic_cpu_sys_reg_init();
> >
> > static int gic_cpu_pm_notifier(struct notifier_block *self,
> > unsigned long cmd, void *v)
> > {
> > if (cmd == CPU_PM_EXIT) {
> > if (gic_dist_security_disabled())
> > gic_enable_redist(true);
> > gic_cpu_sys_reg_init();
> > } else if (cmd == CPU_PM_ENTER && gic_dist_security_disabled()) {
> > gic_write_grpen1(0);
> > gic_enable_redist(false);
> > }
> > return NOTIFY_OK;
> > }
> >
> > During CPU_PM_ENTER notification, we are not doing anything for the
> > !gic_dist_security_disabled() case. Since CPU_PM_ENTER_FAILED notification
> > arrive when CPU fails to power down, do we need to reinitialize the
> > system registers? IOW, should we do different handling for CPU_PM_ENTER_FAILED
> > based on gic_dist_security_disabled()?
>
> What does it gain you apart from the extra complexity?
>
Probably nothing. I am not very familiar with this part of code. If
gic_cpu_sys_reg_init() is written in such a way that it can be called even
when the CPU is not powered down, there is nothing to worry. The additional
complexity of dealing CPU_PM_EXIT vs CPU_PM_ENTER is pointless.

> gic_cpu_sys_reg_init() does very little, and makes sure we're always
> back into a sane state.
>

Understood. Thanks for taking a look.

Thanks,
Pavan

\
 
 \ /
  Last update: 2023-03-26 23:22    [W:0.142 / U:1.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site