lkml.org 
[lkml]   [2022]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2 6/6] dmaengine: xilinx_dma: Program interrupt delay timeout
On 24-11-22, 15:57, Sarath Babu Naidu Gaddam wrote:
> From: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
>
> Program IRQDelay for AXI DMA. The interrupt timeout mechanism causes
> the DMA engine to generate an interrupt after the delay time period
> has expired. It enables dmaengine to respond in real-time even though
> interrupt coalescing is configured. It also remove the placeholder
> for delay interrupt and merge it with frame completion interrupt.
> Since by default interrupt delay timeout is disabled this feature
> addition has no functional impact on VDMA and CDMA IP's.
>
> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
> Signed-off-by: Sarath Babu Naidu Gaddam <sarath.babu.naidu.gaddam@amd.com>
> ---
> drivers/dma/xilinx/xilinx_dma.c | 20 +++++++++++---------
> 1 file changed, 11 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
> index ce0c151d8f61..333d68ee3559 100644
> --- a/drivers/dma/xilinx/xilinx_dma.c
> +++ b/drivers/dma/xilinx/xilinx_dma.c
> @@ -173,8 +173,10 @@
> #define XILINX_DMA_MAX_TRANS_LEN_MAX 23
> #define XILINX_DMA_V2_MAX_TRANS_LEN_MAX 26
> #define XILINX_DMA_CR_COALESCE_MAX GENMASK(23, 16)
> +#define XILINX_DMA_CR_DELAY_MAX GENMASK(31, 24)
> #define XILINX_DMA_CR_CYCLIC_BD_EN_MASK BIT(4)
> #define XILINX_DMA_CR_COALESCE_SHIFT 16
> +#define XILINX_DMA_CR_DELAY_SHIFT 24
> #define XILINX_DMA_BD_SOP BIT(27)
> #define XILINX_DMA_BD_EOP BIT(26)
> #define XILINX_DMA_COALESCE_MAX 255
> @@ -410,6 +412,7 @@ struct xilinx_dma_tx_descriptor {
> * @stop_transfer: Differentiate b/w DMA IP's quiesce
> * @tdest: TDEST value for mcdma
> * @has_vflip: S2MM vertical flip
> + * @irq_delay: Interrupt delay timeout
> */
> struct xilinx_dma_chan {
> struct xilinx_dma_device *xdev;
> @@ -448,6 +451,7 @@ struct xilinx_dma_chan {
> int (*stop_transfer)(struct xilinx_dma_chan *chan);
> u16 tdest;
> bool has_vflip;
> + u8 irq_delay;
> };
>
> /**
> @@ -1560,6 +1564,9 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
> if (chan->has_sg)
> xilinx_write(chan, XILINX_DMA_REG_CURDESC,
> head_desc->async_tx.phys);
> + reg &= ~XILINX_DMA_CR_DELAY_MAX;
> + reg |= chan->irq_delay << XILINX_DMA_CR_DELAY_SHIFT;
> + dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
>
> xilinx_dma_start(chan);
>
> @@ -1887,15 +1894,8 @@ static irqreturn_t xilinx_dma_irq_handler(int irq, void *data)
> }
> }
>
> - if (status & XILINX_DMA_DMASR_DLY_CNT_IRQ) {
> - /*
> - * Device takes too long to do the transfer when user requires
> - * responsiveness.
> - */
> - dev_dbg(chan->dev, "Inter-packet latency too long\n");
> - }
> -
> - if (status & XILINX_DMA_DMASR_FRM_CNT_IRQ) {
> + if (status & (XILINX_DMA_DMASR_FRM_CNT_IRQ |
> + XILINX_DMA_DMASR_DLY_CNT_IRQ)) {
> spin_lock(&chan->lock);
> xilinx_dma_complete_descriptor(chan);
> chan->idle = true;
> @@ -2822,6 +2822,8 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
> /* Retrieve the channel properties from the device tree */
> has_dre = of_property_read_bool(node, "xlnx,include-dre");
>
> + of_property_read_u8(node, "xlnx,irq-delay", &chan->irq_delay);

Same question here too

> +
> chan->genlock = of_property_read_bool(node, "xlnx,genlock-mode");
>
> err = of_property_read_u32(node, "xlnx,datawidth", &value);
> --
> 2.25.1

--
~Vinod

\
 
 \ /
  Last update: 2023-03-26 23:22    [W:0.309 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site