lkml.org 
[lkml]   [2022]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v1 01/11] dt-bindings: usb: Add device id for Genesys Logic hub controller
From
Date
在 2022-12-28星期三的 10:03 +0000,Anand Moon写道:
> Add usb hub device id for Genesys Logic, Inc. GL852G-OHG Hub USB 2.0
> root hub and Genesys Logic, Inc. GL3523-QFN76 USB 3.1 root hub.
>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---
>  Documentation/devicetree/bindings/usb/genesys,gl850g.yaml | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git
> a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> index a9f831448cca..db009f3ef438 100644
> --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> @@ -16,6 +16,8 @@ properties:
>    compatible:
>      enum:
>        - usb5e3,608
> +      - genesys,usb5e3,610
> +      - genesys,usb5e3,620

I don't think genesys, is needed here because usb5e3 means USB VID
0x05e3, which is already linked to Genesys Logic.

In addition, the control logic of these two hubs are needed to be
verified.

And what's the status of the companion hub of the USB3 hub? Is it
really a USB3-only hub, or is its USB2 part just equal to another USB3
hub?

>  
>    reg: true
>  

\
 
 \ /
  Last update: 2023-03-26 23:22    [W:0.112 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site