lkml.org 
[lkml]   [2022]   [Dec]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/5] Add support for pressure sensor Bosch BMP580
Date
This patchset adds support for the new pressure sensors BMP580 extending
the bmp280 driver.

Patch 1 introduces a variant enumeration and refactors sensor verification
logic adding a chip_id field to the chip_info struct. This change is
required because BMP380 and BMP580 have the same chip_id and values would
collide using the chip_id as the driver_data value.
Patch 2 introduces new preinit callback and unifies init logic across all
supported variants.
Patch 3 adds the logic to read measurements and configure operations params
of the BMP580 pressure sensor.
Patch 4 updates the devicetree binding docs with the new sensor id
Patch 5 adds the NVMEM operations to read and program the NVM user range
contained in the non-volatile memory of the BMP580 sensors.

Angel Iglesias (5):
iio: pressure: bmp280: Add enumeration to handle chip variants
iio: pressure: bmp280: Add preinit callback
iio: pressure: bmp280: Add support for new sensor BMP580
dt-bindings: iio: pressure: bmp085: Add BMP580 compatible string
iio: pressure: bmp280: Add nvmem operations for BMP580

.../bindings/iio/pressure/bmp085.yaml | 2 +
drivers/iio/pressure/Kconfig | 6 +-
drivers/iio/pressure/bmp280-core.c | 617 +++++++++++++++++-
drivers/iio/pressure/bmp280-i2c.c | 33 +-
drivers/iio/pressure/bmp280-regmap.c | 60 ++
drivers/iio/pressure/bmp280-spi.c | 23 +-
drivers/iio/pressure/bmp280.h | 115 ++++
7 files changed, 815 insertions(+), 41 deletions(-)


base-commit: e807541c2b273677e82ef50b5747ec7ae7d652b9
--
2.39.0

\
 
 \ /
  Last update: 2023-03-26 23:19    [W:0.164 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site