lkml.org 
[lkml]   [2022]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 2/3] dt-bindings: leds: add worldsemi,ws2812b
From
On 23/12/2022 18:19, Pavel Machek wrote:
> Hi!
>
>>> Add dt binding schema for WorldSemi WS2812B driven using SPI
>>> bus.
>>>
>>> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
>>> ---
>>> Changes since v1:
>>> remove linux driver reference from description
>>> remove some obvious descriptions
>>> fix unit address regex in multi-led property
>>> drop various minItems
>>> add maxItems = 1 to reg
>>> fix node names and property orders in binding example
>>> drop -spi from compatible string
>>> add default-brightness
>>>
>>> Change since v2:
>>> drop "this patch" from commit message
>>> rename leds to led-controller
>>> drop default-brightness and default-intensity
>>>
>>> Change since v3:
>>> reword commit title
>>>
>>> .../bindings/leds/worldsemi,ws2812b.yaml | 116 ++++++++++++++++++
>>> 1 file changed, 116 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/leds/worldsemi,ws2812b.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/leds/worldsemi,ws2812b.yaml b/Documentation/devicetree/bindings/leds/worldsemi,ws2812b.yaml
>>> new file mode 100644
>>> index 000000000000..548c05ac3d31
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/leds/worldsemi,ws2812b.yaml
>>> @@ -0,0 +1,116 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/leds/worldsemi,ws2812b.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: WS2812B LEDs driven using SPI
>>> +
>>> +maintainers:
>>> + - Chuanhong Guo <gch981213@gmail.com>
>>> +
>>> +description: |
>>> + WorldSemi WS2812B is a individually addressable LED chip that can be chained
>>> + together and controlled individually using a single wire.
>>> + This binding describes a chain of WS2812B LEDs connected to the SPI MOSI pin.
>>> + Typical setups includes connecting the data pin of the LED chain to MOSI as
>>> + the only device or using CS and MOSI with a tri-state voltage-level shifter
>>> + for the data pin.
>>> + The SPI frequency needs to be 2.105MHz~2.85MHz for the timing to be correct
>>> + and the controller needs to send all the bytes continuously.
>>> +
>>> +allOf:
>>> + - $ref: /schemas/spi/spi-peripheral-props.yaml#
>>> +
>>> +properties:
>>> + compatible:
>>> + const: worldsemi,ws2812b
>>> +
>>> + reg:
>>> + maxItems: 1
>>> +
>>> + spi-max-frequency:
>>> + minimum: 2105000
>>> + maximum: 2850000
>>> +
>>> + "#address-cells":
>>> + const: 1
>>> +
>>> + "#size-cells":
>>> + const: 0
>>> +
>>> +patternProperties:
>>> + "^multi-led@[0-9a-f]+$":
>>> + type: object
>>> + $ref: leds-class-multicolor.yaml#
>>> + unevaluatedProperties: false
>>> +
>>> + properties:
>>> + color-index:
>>> + description: |
>>> + A 3-item array specifying color of each components in this LED. It
>>> + should be one of the LED_COLOR_ID_* prefixed definitions from the
>>> + header include/dt-bindings/leds/common.h. Defaults to
>>> + <LED_COLOR_ID_GREEN LED_COLOR_ID_RED LED_COLOR_ID_BLUE>
>>> + if unspecified.
>>> + $ref: /schemas/types.yaml#/definitions/uint32-array
>>> + maxItems: 3
>>
>> In general I am fine with it, although there is still question for
>> adding more multi-color defines in binding headers to replace this
>> property - GRB/RBG/GBR and even more for RGBW.
>>
>> Pavel, Lee, any thoughts from your side?
>
> This really needs to mention the name this hardware is known as -- I
> believe it is NeoPixel.

We wait here for feedback on colors... The binding is re-implementing
color, just because of combinations GRB/RBG/GBR, which could be achieved
with new color defines.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2023-03-26 23:19    [W:0.174 / U:0.924 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site