lkml.org 
[lkml]   [2022]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: 6.2 nvme-pci: something wrong
On Fri, 23 Dec 2022, Christoph Hellwig wrote:
> On Fri, Dec 23, 2022 at 09:24:56PM -0800, Hugh Dickins wrote:
> > Hi Christoph,
> >
> > There's something wrong with the nvme-pci heading for 6.2-rc1:
> > no problem booting here on this Lenovo ThinkPad X1 Carbon 5th,
> > but under load...
> >
> > nvme nvme0: I/O 0 (I/O Cmd) QID 2 timeout, aborting
> > nvme nvme0: I/O 1 (I/O Cmd) QID 2 timeout, aborting
> > nvme nvme0: I/O 2 (I/O Cmd) QID 2 timeout, aborting
> > nvme nvme0: I/O 3 (I/O Cmd) QID 2 timeout, aborting
> > nvme nvme0: Abort status: 0x0
> > nvme nvme0: Abort status: 0x0
> > nvme nvme0: Abort status: 0x0
> > nvme nvme0: Abort status: 0x0
> > nvme nvme0: I/O 0 QID 2 timeout, reset controller
> >
> > ...and more, until I just have to poweroff and reboot.
> >
> > Bisection points to your
> > 0da7feaa5913 ("nvme-pci: use the tagset alloc/free helpers")
> > And that does revert cleanly, giving a kernel which shows no problem.
> >
> > I've spent a while comparing old nvme_pci_alloc_tag_set() and new
> > nvme_alloc_io_tag_set(), I do not know my way around there at all
> > and may be talking nonsense, but it did look as if there might now
> > be a difference in the queue_depth, sqsize, q_depth conversions.
> >
> > I'm running load successfully with the patch below, but I strongly
> > suspect that the right patch will be somewhere else: over to you!
>
> Thanks for the report! The patch is definitively wrong, ->sqsize
> hold one of the awful so called 'zeroes based values' in NVMe,
> where 0 means 1, and thus have a built-in one off. We should
> probably convert it to a sane value at read time, but that's a
> separate discussion.
>
> I suspect your controller is one of those where we quirk the size,
> and the commit you bisected fails to reflects that in the common
> sqsizse value. The patch below should be the minimum fix, and in
> the long term, the duplicate bookkeeping for it in the PCI driver
> should go away:

Thanks for the rapid response. No, I've just tried your patch below,
and it does not help. And I don't see any message about "queue size"
in dmesg, so don't think mine is quirked.

cat /sys/devices/pci0000:00/0000:00:1c.4/0000:05:00.0/nvme/nvme0/sqsize
tells me 511 (and that looked like the only relevant file under /sys).

Regarding the awful 0's based queue depth: yes, it just looked to me
as if the way that got handled in pci.c before differed from the way
it gets handled in pci.c and core.c now, one too many "+ 1"s or "- 1"s
somewhere.

>
> diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
> index f0f8027644bbf8..a73c0ee7bd1892 100644
> --- a/drivers/nvme/host/pci.c
> +++ b/drivers/nvme/host/pci.c
> @@ -2536,7 +2536,6 @@ static int nvme_pci_enable(struct nvme_dev *dev)
>
> dev->q_depth = min_t(u32, NVME_CAP_MQES(dev->ctrl.cap) + 1,
> io_queue_depth);
> - dev->ctrl.sqsize = dev->q_depth - 1; /* 0's based queue depth */
> dev->db_stride = 1 << NVME_CAP_STRIDE(dev->ctrl.cap);
> dev->dbs = dev->bar + 4096;
>
> @@ -2577,7 +2576,7 @@ static int nvme_pci_enable(struct nvme_dev *dev)
> dev_warn(dev->ctrl.device, "IO queue depth clamped to %d\n",
> dev->q_depth);
> }
> -
> + dev->ctrl.sqsize = dev->q_depth - 1; /* 0's based queue depth */
>
> nvme_map_cmb(dev);
>

\
 
 \ /
  Last update: 2023-03-26 23:19    [W:0.155 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site