lkml.org 
[lkml]   [2022]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v4 3/3] media: uvcvideo: Add a unique suffix to camera names
On Wed, Dec 21, 2022 at 10:54:50PM +0000, Mauro Carvalho Chehab wrote:
> Em Thu, 22 Dec 2022 00:24:44 +0200
> Laurent Pinchart <laurent.pinchart@ideasonboard.com> escreveu:
>
> > Hi Mauro,
> >
> > On Wed, Dec 21, 2022 at 10:02:48PM +0000, Mauro Carvalho Chehab wrote:
> > > Em Tue, 6 Dec 2022 00:02:22 +0100 Ricardo Ribalda escreveu:
> > > > On Mon, 5 Dec 2022 at 23:16, Laurent Pinchart wrote:
> > > > > On Fri, Dec 02, 2022 at 06:08:19PM +0100, Ricardo Ribalda wrote:
> > > > > > Some cameras have multiple data inputs (i.e. IR sensor and RGB sensor),
> > > > > > append a unique number to the device name.
> > > > > >
> > > > > > Fixes v4l2-compliance:
> > > > > > Media Controller ioctls:
> > > > > > fail: v4l2-test-media.cpp(205): v2_entity_names_set.find(key) != v2_entity_names_set.end()
> > > > > > test MEDIA_IOC_G_TOPOLOGY: FAIL
> > > > > > fail: v4l2-test-media.cpp(394): num_data_links != num_links
> > > > > > test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL
> > > > > >
> > > > > > Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
> > > > > > ---
> > > > > > drivers/media/usb/uvc/uvc_driver.c | 3 ++-
> > > > > > 1 file changed, 2 insertions(+), 1 deletion(-)
> > > > > >
> > > > > > diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
> > > > > > index 215fb483efb0..f4032ebb3689 100644
> > > > > > --- a/drivers/media/usb/uvc/uvc_driver.c
> > > > > > +++ b/drivers/media/usb/uvc/uvc_driver.c
> > > > > > @@ -1963,7 +1963,8 @@ int uvc_register_video_device(struct uvc_device *dev,
> > > > > > break;
> > > > > > }
> > > > > >
> > > > > > - strscpy(vdev->name, dev->name, sizeof(vdev->name));
> > > > > > + snprintf(vdev->name, sizeof(vdev->name), "%s %u", dev->name,
> > > > > > + stream->header.bTerminalLink);
> > > > >
> > > > > This won't be perfect as the string is not guaranteed to fit in
> > > > > vdev->name, but I suppose it will help as a quick fix for some devices.
> > > > > How about the other devices ? Won't they still exhibit the above
> > > > > v4l2-compliance failure ? Isn't that something that will still affect
> > > > > Chrome OS devices ?
> > > >
> > > > We could place the id first... but that will look bad: Eg:
> > > >
> > > > 1- My favorite camera
> > > >
> > > > Another option is to remove the last chars to fit the id. Eg:
> > > >
> > > > My favorite came-1
> > > >
> > > > If you prefer any of those options or have a better idea I can implement that.
> > > >
> > > > > The change should not cause any regression as big as in patch 1/3.
> > > > > However, unless I'm mistaken users will notice a device name change,
> > > > > especially when selecting a device in their web browser. Could that be a
> > > > > problem ?
> > > >
> > > > I think the only side effect is that the first time that the kernel
> > > > changes the naming convention, if there are more than one camera on
> > > > the system, the video conference might pick a different camera.
> > > > The good news is that the user will be presented with cameras with
> > > > different names. Now some cameras show very confusing names:
> > > >
> > > > ribalda@alco:~/work/linux$ for a in /dev/video* ; do yavta -l $a| grep
> > > > "Dell Webcam"; done
> > > > Device `Dell Webcam WB7022' on `usb-0000:2d:00.0-1.2.3.1' (driver
> > > > 'uvcvideo') supports video, capture, without mplanes.
> > > > Device `Dell Webcam WB7022' on `usb-0000:2d:00.0-1.2.3.1' (driver
> > > > 'uvcvideo') supports meta-data, capture, without mplanes.
> > > > Device `Dell Webcam WB7022' on `usb-0000:2d:00.0-1.2.3.1' (driver
> > > > 'uvcvideo') supports video, capture, without mplanes.
> > > > Device `Dell Webcam WB7022' on `usb-0000:2d:00.0-1.2.3.1' (driver
> > > > 'uvcvideo') supports meta-data, capture, without mplanes.
> > >
> > > That is bad, as some apps like camorama actually store the user
> > > preferences (last used resolution and fps), preserving them the next
> > > time the camera with the same name is used.
> > >
> > > In the specific case of camorama, it uses the by-id filename, which is
> > > derived from the name, as stored at:
> > >
> > > $ ls -la /dev/v4l/by-id/usb-Quanta_HD_Camera_0001-video-index*
> > > lrwxrwxrwx 1 root root 12 dez 21 09:59 /dev/v4l/by-id/usb-Quanta_HD_Camera_0001-video-index0 -> ../../video0
> > > lrwxrwxrwx 1 root root 12 dez 21 09:59 /dev/v4l/by-id/usb-Quanta_HD_Camera_0001-video-index1 -> ../../video1
> > >
> > > With this change, not only the camera name will become bigger (and may
> > > end losing the index0/index1 data), but it will also lost the stored
> > > preferences on apps like camorama, causing regressions.
> > >
> > > It sounds a lot easier to teach udev to change the name on an unique
> > > way, on machines where you need it.
> >
> > It's not a udev issue, it's an API compliance problem, entity names in a
> > media controller graph must be unique, and they are not.
>
> Then the right fix would be inside the media controller naming
> logic, in a way that it will ensure unique names. It sounds to me
> that mc core should then check, at device's register time, if the
> name was already used. If so, change it to be unique.

The entity name and video device name are one and the same.

> > Losing the stored preference is possibly inconvenient in some cases, but
> > I don't think it's a real blocker.
>
> If it causes userspace regressions, then it is a blocker.

I wouldn't necessarily call this a regression.

--
Regards,

Laurent Pinchart
\
 
 \ /
  Last update: 2023-03-26 23:17    [W:0.042 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site