lkml.org 
[lkml]   [2022]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 3/3] media: uvcvideo: Add a unique suffix to camera names
Hi Ricardo,

On Wed, Dec 21, 2022 at 09:21:57PM +0100, Ricardo Ribalda wrote:
> On Wed, 21 Dec 2022 at 12:23, Laurent Pinchart wrote:
> > On Wed, Dec 21, 2022 at 11:57:48AM +0100, Ricardo Ribalda wrote:
> > > On Wed, 21 Dec 2022 at 11:55, Laurent Pinchart wrote:
> > > > On Wed, Dec 21, 2022 at 12:00:58AM +0100, Ricardo Ribalda wrote:
> > > > > On Tue, 6 Dec 2022 at 00:02, Ricardo Ribalda wrote:
> > > > > > On Mon, 5 Dec 2022 at 23:16, Laurent Pinchart wrote:
> > > > > > > On Fri, Dec 02, 2022 at 06:08:19PM +0100, Ricardo Ribalda wrote:
> > > > > > > > Some cameras have multiple data inputs (i.e. IR sensor and RGB sensor),
> > > >
> > > > Did you mean "data outputs" by the way ?
> > > >
> > > > > > > > append a unique number to the device name.
> > > > > > > >
> > > > > > > > Fixes v4l2-compliance:
> > > > > > > > Media Controller ioctls:
> > > > > > > > fail: v4l2-test-media.cpp(205): v2_entity_names_set.find(key) != v2_entity_names_set.end()
> > > > > > > > test MEDIA_IOC_G_TOPOLOGY: FAIL
> > > > > > > > fail: v4l2-test-media.cpp(394): num_data_links != num_links
> > > > > > > > test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL
> > > > > > > >
> > > > > > > > Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
> > > > > > > > ---
> > > > > > > > drivers/media/usb/uvc/uvc_driver.c | 3 ++-
> > > > > > > > 1 file changed, 2 insertions(+), 1 deletion(-)
> > > > > > > >
> > > > > > > > diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
> > > > > > > > index 215fb483efb0..f4032ebb3689 100644
> > > > > > > > --- a/drivers/media/usb/uvc/uvc_driver.c
> > > > > > > > +++ b/drivers/media/usb/uvc/uvc_driver.c
> > > > > > > > @@ -1963,7 +1963,8 @@ int uvc_register_video_device(struct uvc_device *dev,
> > > > > > > > break;
> > > > > > > > }
> > > > > > > >
> > > > > > > > - strscpy(vdev->name, dev->name, sizeof(vdev->name));
> > > > > > > > + snprintf(vdev->name, sizeof(vdev->name), "%s %u", dev->name,
> > > > > > > > + stream->header.bTerminalLink);
> > > > > > >
> > > > > > > This won't be perfect as the string is not guaranteed to fit in
> > > > > > > vdev->name, but I suppose it will help as a quick fix for some devices.
> > > > > > > How about the other devices ? Won't they still exhibit the above
> > > > > > > v4l2-compliance failure ? Isn't that something that will still affect
> > > > > > > Chrome OS devices ?
> > > > > >
> > > > > > We could place the id first... but that will look bad: Eg:
> > > > > >
> > > > > > 1- My favorite camera
> > > > > >
> > > > > > Another option is to remove the last chars to fit the id. Eg:
> > > > > >
> > > > > > My favorite came-1
> > > > > >
> > > > > > If you prefer any of those options or have a better idea I can implement that.
> > > > >
> > > > > @Laurent
> > > > >
> > > > > Any preference here?
> > > >
> > > > I think the latter is better. Could we do so only when there are
> > > > multiple video capture devices (excluding the metadata device) though ?
> > > > That way we won't have a weird "-n" suffix in the majority of use cases.
> > > >
> > > > > > > The change should not cause any regression as big as in patch 1/3.
> > > > > > > However, unless I'm mistaken users will notice a device name change,
> > > > > > > especially when selecting a device in their web browser. Could that be a
> > > > > > > problem ?
> > > > > >
> > > > > > I think the only side effect is that the first time that the kernel
> > > > > > changes the naming convention, if there are more than one camera on
> > > > > > the system, the video conference might pick a different camera.
> > > > > > The good news is that the user will be presented with cameras with
> > > > > > different names. Now some cameras show very confusing names:
> > > > > >
> > > > > > ribalda@alco:~/work/linux$ for a in /dev/video* ; do yavta -l $a| grep
> > > > > > "Dell Webcam"; done
> > > > > > Device `Dell Webcam WB7022' on `usb-0000:2d:00.0-1.2.3.1' (driver
> > > > > > 'uvcvideo') supports video, capture, without mplanes.
> > > > > > Device `Dell Webcam WB7022' on `usb-0000:2d:00.0-1.2.3.1' (driver
> > > > > > 'uvcvideo') supports meta-data, capture, without mplanes.
> > > > > > Device `Dell Webcam WB7022' on `usb-0000:2d:00.0-1.2.3.1' (driver
> > > > > > 'uvcvideo') supports video, capture, without mplanes.
> > > > > > Device `Dell Webcam WB7022' on `usb-0000:2d:00.0-1.2.3.1' (driver
> > > > > > 'uvcvideo') supports meta-data, capture, without mplanes.
> > > >
> > > > I'm tempted to add a new model read-only string control to overcome the
> > > > length limitation. It could then be combined with other information
> > > > (such as the location and supported pixel formats) to create a
> > > > user-friendly camera name by applications.
> > >
> > > Adding the vid:pid would be really useful! Mapping a /dev/videoX to
> > > vid:pid is kind of complicated now.
> >
> > libcamera can help there ;-) We already extract the vendor and product
> > ID. They are only used to create the camera ID at the moment, they are
> > not exposed to applications independently. That would be a good
> > addition.
> >
> > Overall, device naming is something that we have decided *not* to handle
> > in libcamera. We provide information to applications to help them
> > construct a meaningful name, but don't create the name ourselves. This
> > was decided because naming schemes are dependent on application use
> > cases, and in many cases should be localized (e.g. "Front camera" and
> > "Back camera" vs. "Etukamera" and "Takakamera").
>
> Thanks for the explanation!
>
> My use case is: vendor apps for doing provisioning or low level
> testing. Libcamera would be a bit too much for that ;)
>
> Most of the time they do not get an image, but set fancy controls.

I see what you mean. libcamera isn't the right tool for that indeed, but
maybe the additional complexity of looking up the VID:PID isn't such a
big deal in those cases ? It's not that complicated using sysfs, and can
even be done quite simply with a shell script. Maybe a standard simple
script in v4l-utils (or in another location) could help ?

> > > > > > > > /*
> > > > > > > > * Set the driver data before calling video_register_device, otherwise
> > > > > > > >

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2023-03-26 23:17    [W:0.058 / U:1.936 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site