lkml.org 
[lkml]   [2022]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/2] intel_pstate: fix turbo not being used after a processor is rebooted
From
Date
On Wed, 2022-12-21 at 16:52 +0100, Pratyush Yadav wrote:
> When a processor is brought offline and online again, it is unable to
> use Turbo mode because the _PSS table does not contain the whole
> turbo
> frequency range, but only +1 MHz above the max non-turbo frequency.
> This
> causes problems when ACPI processor driver tries to set frequency
> constraints. See patch 2 for more details.
>
Are you using some _PPC constraint to force to limit frequency?
I did a offline/online with PPC=0 with no HWP, I can get to full turbo
range.

[ 121.237752] smpboot: CPU 1 is now offline
[ 125.734886] x86: Booting SMP configuration:
[ 125.734892] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 125.741007] intel_pstate: CPU 1 going online
[ 125.741692] intel_pstate: CPU1 - ACPI _PSS perf data
[ 125.741698] intel_pstate: *P0: 2301 MHz, 28000 mW, 0x2a00
[ 125.741703] intel_pstate: P1: 2300 MHz, 28000 mW, 0x1700
[ 125.741705] intel_pstate: P2: 2200 MHz, 26297 mW, 0x1600
[ 125.741707] intel_pstate: P3: 2000 MHz, 23263 mW, 0x1400
[ 125.741710] intel_pstate: P4: 1900 MHz, 21924 mW, 0x1300
[ 125.741712] intel_pstate: P5: 1800 MHz, 20612 mW, 0x1200
[ 125.741714] intel_pstate: P6: 1600 MHz, 17812 mW, 0x1000
[ 125.741716] intel_pstate: P7: 1500 MHz, 16581 mW, 0xf00
[ 125.741718] intel_pstate: P8: 1300 MHz, 13946 mW, 0xd00
[ 125.741720] intel_pstate: P9: 1200 MHz, 12796 mW, 0xc00
[ 125.741722] intel_pstate: P10: 1100 MHz, 11426 mW, 0xb00
[ 125.741724] intel_pstate: P11: 900 MHz, 9250 mW, 0x900
[ 125.741726] intel_pstate: P12: 800 MHz, 7965 mW, 0x800
[ 125.741729] intel_pstate: P13: 700 MHz, 6940 mW, 0x700
[ 125.741731] intel_pstate: P14: 500 MHz, 4738 mW, 0x500
[ 125.741733] intel_pstate: P15: 400 MHz, 3787 mW, 0x400
[ 125.741735] intel_pstate: _PPC limits will be enforced
[ 125.741740] intel_pstate: policy->max > max non turbo frequency
[ 125.741742] intel_pstate: cpu:1 min_policy_perf:4 max_policy_perf:42
[ 125.741745] intel_pstate: cpu:1 global_min:4 global_max:42
[ 125.741747] intel_pstate: cpu:1 max_perf_ratio:42 min_perf_ratio:4
[ 125.742243] intel_pstate: policy->max > max non turbo frequency
[ 125.742247] intel_pstate: cpu:1 min_policy_perf:4 max_policy_perf:42
[ 125.742251] intel_pstate: cpu:1 global_min:4 global_max:42
[ 125.742255] intel_pstate: cpu:1 max_perf_ratio:42 min_perf_ratio:4


It is not clear how to get to this non turbo situation.

Thanks,
Srinivas

> Pratyush Yadav (2):
>   acpi: processor: allow fixing up the frequency for a performance
> state
>   cpufreq: intel_pstate: use acpi perflib to update turbo frequency
>
>  drivers/acpi/processor_perflib.c | 40
> ++++++++++++++++++++++++++++++++
>  drivers/cpufreq/intel_pstate.c   |  5 ++--
>  include/acpi/processor.h         |  2 ++
>  3 files changed, 45 insertions(+), 2 deletions(-)
>
> --
> 2.38.1
>

\
 
 \ /
  Last update: 2023-03-26 23:17    [W:0.095 / U:0.752 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site