lkml.org 
[lkml]   [2022]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: net: Add rfkill-gpio binding
On Wed, Dec 21, 2022 at 11:48:02AM +0100, Philipp Zabel wrote:
> Add a device tree binding document for GPIO controlled rfkill switches.
> The name, type, shutdown-gpios and reset-gpios properties are the same
> as defined for ACPI.
>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
> .../devicetree/bindings/net/rfkill-gpio.yaml | 60 +++++++++++++++++++
> 1 file changed, 60 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/rfkill-gpio.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/rfkill-gpio.yaml b/Documentation/devicetree/bindings/net/rfkill-gpio.yaml
> new file mode 100644
> index 000000000000..6e62e6c96456
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/rfkill-gpio.yaml
> @@ -0,0 +1,60 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/net/rfkill-gpio.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: GPIO controlled rfkill switch
> +
> +maintainers:
> + - Johannes Berg <johannes@sipsolutions.net>
> + - Philipp Zabel <p.zabel@pengutronix.de>
> +
> +properties:
> + compatible:
> + const: rfkill-gpio
> +
> + name:

Did you test this? Something should complain, but maybe not. The problem
is 'name' is already a property in the unflattened DT (and old FDT
formats).

'label' would be appropriate perhaps, but why do we care what the name
is?

> + $ref: /schemas/types.yaml#/definitions/string
> + description: rfkill switch name, defaults to node name
> +
> + type:

Too generic. Property names should ideally have 1 type globally. I think
'type' is already in use. 'radio-type' instead?


> + description: rfkill radio type
> + enum:
> + - wlan
> + - bluetooth
> + - ultrawideband
> + - wimax
> + - wwan
> + - gps
> + - fm
> + - nfc
> +
> + shutdown-gpios:
> + maxItems: 1
> +
> + reset-gpios:
> + maxItems: 1

I'm lost as to why there are 2 GPIOs.

> +
> +required:
> + - compatible
> + - type
> +
> +oneOf:
> + - required:
> + - shutdown-gpios
> + - required:
> + - reset-gpios

But only 1 can be present? So just define 1 GPIO name.

> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + rfkill-pcie-wlan {

Node names should be generic.

> + compatible = "rfkill-gpio";
> + name = "rfkill-pcie-wlan";
> + type = "wlan";
> + shutdown-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
> + };
> --
> 2.30.2
>
>

\
 
 \ /
  Last update: 2023-03-26 23:16    [W:0.083 / U:1.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site