lkml.org 
[lkml]   [2022]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v9 5/5] drm/bridge: cdns-dsi: Add support for J721E wrapper
From
On 31/10/2022 14:19, Rahul T R wrote:
> Add support for wrapper settings for DSI bridge on
> j721e. Also enable DPI0
>
> --------------- -----------------------
> | -------| |------- |
> | DSS | DPI2 |----->| DPI0 | DSI Wrapper |
> | -------| |------- |
> --------------- -----------------------
>
> As shown above DPI2 output of DSS is connected
> to DPI0 input of DSI Wrapper, DSI wrapper
> gives control wheather to enable/disable DPI0
> input. In j721e above is the only configuration
> supported
>
> Signed-off-by: Rahul T R <r-ravikumar@ti.com>
> ---
> drivers/gpu/drm/bridge/cadence/Kconfig | 10 ++++
> drivers/gpu/drm/bridge/cadence/Makefile | 1 +
> .../gpu/drm/bridge/cadence/cdns-dsi-core.c | 35 ++++++++++++-
> .../gpu/drm/bridge/cadence/cdns-dsi-core.h | 13 +++++
> .../gpu/drm/bridge/cadence/cdns-dsi-j721e.c | 51 +++++++++++++++++++
> .../gpu/drm/bridge/cadence/cdns-dsi-j721e.h | 16 ++++++
> 6 files changed, 125 insertions(+), 1 deletion(-)
> create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-dsi-j721e.c
> create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-dsi-j721e.h

Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

Tomi

\
 
 \ /
  Last update: 2023-03-26 23:16    [W:0.056 / U:3.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site