lkml.org 
[lkml]   [2022]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] USB: Improve usb_fill_* documentation
Hi Ricardo,

Thank you for the patch.

On Wed, Dec 21, 2022 at 11:15:14AM +0100, Ricardo Ribalda wrote:
> Document the transfer buffer requirement. That is, the buffer must be
> DMAble - otherwise data corruption might occur.
>
> Acked-by: Randy Dunlap <rdunlap@infradead.org>
> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
> ---
> USB: Improve usb_fill_* documentation
>
> After trying to "cleanup" the uvc code, I was patiently explained about
> the requirements of the urb transfer buffers.
>
> Lets make this explicit, so other developers do not make the same mistake.
>
> To: Bagas Sanjaya <bagasdotme@gmail.com>
> To: Randy Dunlap <rdunlap@infradead.org>
> To: Alan Stern <stern@rowland.harvard.edu>
> To: Christoph Hellwig <hch@lst.de>
> To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-usb@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---
> Changes in v3:
> - Improve commit message. Thanks Bagas!
> - Improve field description. Thanks Alan!
> - Link to v2: https://lore.kernel.org/r/20221220-usb-dmadoc-v2-0-4dd4f198113e@chromium.org
>
> Changes in v2:
> - s/allocatiing/allocating/ Thanks Randy
> - Link to v1: https://lore.kernel.org/r/20221220-usb-dmadoc-v1-0-28386d2eb6cd@chromium.org
> ---
> include/linux/usb.h | 27 +++++++++++++++++++++++----
> 1 file changed, 23 insertions(+), 4 deletions(-)
>
> diff --git a/include/linux/usb.h b/include/linux/usb.h
> index 7d5325d47c45..06cde9ddca97 100644
> --- a/include/linux/usb.h
> +++ b/include/linux/usb.h
> @@ -1626,14 +1626,25 @@ struct urb {
> * @urb: pointer to the urb to initialize.
> * @dev: pointer to the struct usb_device for this urb.
> * @pipe: the endpoint pipe
> - * @setup_packet: pointer to the setup_packet buffer
> - * @transfer_buffer: pointer to the transfer buffer
> + * @setup_packet: pointer to the setup_packet buffer. The buffer must be
> + * suitable for DMA.
> + * @transfer_buffer: pointer to the transfer buffer. The buffer must be
> + * suitable for DMA.
> * @buffer_length: length of the transfer buffer
> * @complete_fn: pointer to the usb_complete_t function
> * @context: what to set the urb context to.
> *
> * Initializes a control urb with the proper information needed to submit
> * it to a device.
> + *
> + * The transfer buffer and the setup_packet buffer will most likely be filled
> + * via DMA. The simplest way to get a buffer that can be DMAed to is
> + * allocating it via kmalloc() or equivalent, even for very small buffers.
> + * If the buffers are embedded in a bigger structure, there is a risk that
> + * the buffer itself, the previous field and/or the next field are corrupted

s/field/fields/g

> + * due to cache incoherencies; or slowed down if they are evicted from the
> + * cache.
> + *
> */
> static inline void usb_fill_control_urb(struct urb *urb,
> struct usb_device *dev,
> @@ -1658,13 +1669,17 @@ static inline void usb_fill_control_urb(struct urb *urb,
> * @urb: pointer to the urb to initialize.
> * @dev: pointer to the struct usb_device for this urb.
> * @pipe: the endpoint pipe
> - * @transfer_buffer: pointer to the transfer buffer
> + * @transfer_buffer: pointer to the transfer buffer. The buffer must be
> + * suitable for DMA.
> * @buffer_length: length of the transfer buffer
> * @complete_fn: pointer to the usb_complete_t function
> * @context: what to set the urb context to.
> *
> * Initializes a bulk urb with the proper information needed to submit it
> * to a device.
> + *
> + * Please refer to usb_fill_control_urb() for a description of the

I would drop "please". Same below.

With or without those changes,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> + * requirements for transfer_buffer.
> */
> static inline void usb_fill_bulk_urb(struct urb *urb,
> struct usb_device *dev,
> @@ -1687,7 +1702,8 @@ static inline void usb_fill_bulk_urb(struct urb *urb,
> * @urb: pointer to the urb to initialize.
> * @dev: pointer to the struct usb_device for this urb.
> * @pipe: the endpoint pipe
> - * @transfer_buffer: pointer to the transfer buffer
> + * @transfer_buffer: pointer to the transfer buffer. The buffer must be
> + * suitable for DMA.
> * @buffer_length: length of the transfer buffer
> * @complete_fn: pointer to the usb_complete_t function
> * @context: what to set the urb context to.
> @@ -1697,6 +1713,9 @@ static inline void usb_fill_bulk_urb(struct urb *urb,
> * Initializes a interrupt urb with the proper information needed to submit
> * it to a device.
> *
> + * Please refer to usb_fill_control_urb() for a description of the
> + * requirements for transfer_buffer.
> + *
> * Note that High Speed and SuperSpeed(+) interrupt endpoints use a logarithmic
> * encoding of the endpoint interval, and express polling intervals in
> * microframes (eight per millisecond) rather than in frames (one per
>
> ---
> base-commit: b6bb9676f2165d518b35ba3bea5f1fcfc0d969bf
> change-id: 20221220-usb-dmadoc-29384acebd48

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2023-03-26 23:16    [W:0.069 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site