lkml.org 
[lkml]   [2022]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] spmi: Add a check for remove callback when removing a SPMI driver
Date
When removing a SPMI driver, there can be a crash due to NULL pointer
dereference if it does not have a remove callback defined. This is
one such call trace observed when removing the QCOM SPMI PMIC driver:

dump_backtrace.cfi_jt+0x0/0x8
dump_stack_lvl+0xd8/0x16c
panic+0x188/0x498
__cfi_slowpath+0x0/0x214
__cfi_slowpath+0x1dc/0x214
spmi_drv_remove+0x16c/0x1e0
device_release_driver_internal+0x468/0x79c
driver_detach+0x11c/0x1a0
bus_remove_driver+0xc4/0x124
driver_unregister+0x58/0x84
cleanup_module+0x1c/0xc24 [qcom_spmi_pmic]
__do_sys_delete_module+0x3ec/0x53c
__arm64_sys_delete_module+0x18/0x28
el0_svc_common+0xdc/0x294
el0_svc+0x38/0x9c
el0_sync_handler+0x8c/0xf0
el0_sync+0x1b4/0x1c0

If a driver has all its resources allocated through devm_() APIs and
does not need any other explicit cleanup, it would not require a
remove callback to be defined. Hence, add a check for remove callback
presence before calling it when removing a SPMI driver.

Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
---
drivers/spmi/spmi.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c
index a456ce5..6b34356 100644
--- a/drivers/spmi/spmi.c
+++ b/drivers/spmi/spmi.c
@@ -350,7 +350,8 @@ static void spmi_drv_remove(struct device *dev)
const struct spmi_driver *sdrv = to_spmi_driver(dev->driver);

pm_runtime_get_sync(dev);
- sdrv->remove(to_spmi_device(dev));
+ if (sdrv->remove)
+ sdrv->remove(to_spmi_device(dev));
pm_runtime_put_noidle(dev);

pm_runtime_disable(dev);
--
2.7.4
\
 
 \ /
  Last update: 2023-03-26 23:16    [W:0.046 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site