lkml.org 
[lkml]   [2022]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] net/ncsi: Simplify Kconfig/dts control flow
Date
Background:

1. CONFIG_NCSI_OEM_CMD_KEEP_PHY

If this is enabled, we send an extra OEM Intel command in the probe
sequence immediately after discovering a channel (e.g. after "Clear
Initial State").

2. CONFIG_NCSI_OEM_CMD_GET_MAC

If this is enabled, we send one of 3 OEM "Get MAC Address" commands from
Broadcom, Mellanox (Nvidida), and Intel in the *configuration* sequence
for a channel.

3. mellanox,multi-host (or mlx,multi-host)

Introduced by this patch:

https://lore.kernel.org/all/20200108234341.2590674-1-vijaykhemka@fb.com/

Which was actually originally from cosmo.chou@quantatw.com:

https://github.com/facebook/openbmc-linux/commit/9f132a10ec48db84613519258cd8a317fb9c8f1b

Cosmo claimed that the Nvidia ConnectX-4 and ConnectX-6 NIC's don't
respond to Get Version ID, et. al in the probe sequence unless you send
the Set MC Affinity command first.

Problem Statement:

We've been using a combination of #ifdef code blocks and IS_ENABLED()
conditions to conditionally send these OEM commands.

It makes adding any new code around these commands hard to understand.

Solution:

In this patch, I just want to remove the conditionally compiled blocks
of code, and always use IS_ENABLED(...) to do dynamic control flow.

I don't think the small amount of code this adds to non-users of the OEM
Kconfigs is a big deal.

Signed-off-by: Peter Delevoryas <peter@pjd.dev>
---
net/ncsi/ncsi-manage.c | 20 +++-----------------
1 file changed, 3 insertions(+), 17 deletions(-)

diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index 80713febfac6..f56795769893 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c
@@ -689,8 +689,6 @@ static int set_one_vid(struct ncsi_dev_priv *ndp, struct ncsi_channel *nc,
return 0;
}

-#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_KEEP_PHY)
-
static int ncsi_oem_keep_phy_intel(struct ncsi_cmd_arg *nca)
{
unsigned char data[NCSI_OEM_INTEL_CMD_KEEP_PHY_LEN];
@@ -716,10 +714,6 @@ static int ncsi_oem_keep_phy_intel(struct ncsi_cmd_arg *nca)
return ret;
}

-#endif
-
-#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC)
-
/* NCSI OEM Command APIs */
static int ncsi_oem_gma_handler_bcm(struct ncsi_cmd_arg *nca)
{
@@ -856,8 +850,6 @@ static int ncsi_gma_handler(struct ncsi_cmd_arg *nca, unsigned int mf_id)
return nch->handler(nca);
}

-#endif /* CONFIG_NCSI_OEM_CMD_GET_MAC */
-
/* Determine if a given channel from the channel_queue should be used for Tx */
static bool ncsi_channel_is_tx(struct ncsi_dev_priv *ndp,
struct ncsi_channel *nc)
@@ -1039,20 +1031,18 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
goto error;
}

- nd->state = ncsi_dev_state_config_oem_gma;
+ nd->state = IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC)
+ ? ncsi_dev_state_config_oem_gma
+ : ncsi_dev_state_config_clear_vids;
break;
case ncsi_dev_state_config_oem_gma:
nd->state = ncsi_dev_state_config_clear_vids;
- ret = -1;

-#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC)
nca.type = NCSI_PKT_CMD_OEM;
nca.package = np->id;
nca.channel = nc->id;
ndp->pending_req_num = 1;
ret = ncsi_gma_handler(&nca, nc->version.mf_id);
-#endif /* CONFIG_NCSI_OEM_CMD_GET_MAC */
-
if (ret < 0)
schedule_work(&ndp->work);

@@ -1404,7 +1394,6 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp)

schedule_work(&ndp->work);
break;
-#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC)
case ncsi_dev_state_probe_mlx_gma:
ndp->pending_req_num = 1;

@@ -1429,7 +1418,6 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp)

nd->state = ncsi_dev_state_probe_cis;
break;
-#endif /* CONFIG_NCSI_OEM_CMD_GET_MAC */
case ncsi_dev_state_probe_cis:
ndp->pending_req_num = NCSI_RESERVED_CHANNEL;

@@ -1447,7 +1435,6 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp)
if (IS_ENABLED(CONFIG_NCSI_OEM_CMD_KEEP_PHY))
nd->state = ncsi_dev_state_probe_keep_phy;
break;
-#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_KEEP_PHY)
case ncsi_dev_state_probe_keep_phy:
ndp->pending_req_num = 1;

@@ -1460,7 +1447,6 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp)

nd->state = ncsi_dev_state_probe_gvi;
break;
-#endif /* CONFIG_NCSI_OEM_CMD_KEEP_PHY */
case ncsi_dev_state_probe_gvi:
case ncsi_dev_state_probe_gc:
case ncsi_dev_state_probe_gls:
--
2.30.2
\
 
 \ /
  Last update: 2023-03-26 23:16    [W:0.211 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site