lkml.org 
[lkml]   [2022]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] USB: Improve usb_fill_* documentation
From


On 12/20/22 15:13, Ricardo Ribalda wrote:
> Make the developer aware of the requirements of transfer buffer.
>
> The buffer must be DMAble, if the developer uses an invalid buffer, data
> corruption might happen.
>
> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
> ---
> USB: Improve usb_fill_* documentation
>
> After trying to "cleanup" the uvc code, I was patiently explained about
> the requirements of the urb transfer buffers.
>
> Lets make this explicit, so other developers do not make the same mistake.
>
> To: Randy Dunlap <rdunlap@infradead.org>
> To: Alan Stern <stern@rowland.harvard.edu>
> To: Christoph Hellwig <hch@lst.de>
> To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-usb@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org

LGTM. Thanks.

Acked-by: Randy Dunlap <rdunlap@infradead.org>

> ---
> Changes in v2:
> - s/allocatiing/allocating/ Thanks Randy
> - Link to v1: https://lore.kernel.org/r/20221220-usb-dmadoc-v1-0-28386d2eb6cd@chromium.org
> ---
> include/linux/usb.h | 27 ++++++++++++++++++++++++---
> 1 file changed, 24 insertions(+), 3 deletions(-)
>
> diff --git a/include/linux/usb.h b/include/linux/usb.h
> index 7d5325d47c45..1144ef6e4151 100644
> --- a/include/linux/usb.h
> +++ b/include/linux/usb.h
> @@ -1627,13 +1627,20 @@ struct urb {
> * @dev: pointer to the struct usb_device for this urb.
> * @pipe: the endpoint pipe
> * @setup_packet: pointer to the setup_packet buffer
> - * @transfer_buffer: pointer to the transfer buffer
> + * @transfer_buffer: pointer to the transfer buffer. Must be suitable for DMA.
> * @buffer_length: length of the transfer buffer
> * @complete_fn: pointer to the usb_complete_t function
> * @context: what to set the urb context to.
> *
> * Initializes a control urb with the proper information needed to submit
> * it to a device.
> + *
> + * The transfer buffer might be filled via DMA. The simplest way to get
> + * a buffer that can be DMAed to, is allocating it via kmalloc() or
> + * equivalent, even for very small buffers. If transfer_buffer is embedded
> + * in a bigger structure, there is a risk that the previous and following
> + * fields are left in a corrupted state by the DMA engine, if the platform
> + * is not cache coherent.
> */
> static inline void usb_fill_control_urb(struct urb *urb,
> struct usb_device *dev,
> @@ -1658,13 +1665,20 @@ static inline void usb_fill_control_urb(struct urb *urb,
> * @urb: pointer to the urb to initialize.
> * @dev: pointer to the struct usb_device for this urb.
> * @pipe: the endpoint pipe
> - * @transfer_buffer: pointer to the transfer buffer
> + * @transfer_buffer: pointer to the transfer buffer. Must be suitable for DMA.
> * @buffer_length: length of the transfer buffer
> * @complete_fn: pointer to the usb_complete_t function
> * @context: what to set the urb context to.
> *
> * Initializes a bulk urb with the proper information needed to submit it
> * to a device.
> + *
> + * The transfer buffer might be filled via DMA. The simplest way to get
> + * a buffer that can be DMAed to, is allocating it via kmalloc() or
> + * equivalent, even for very small buffers. If transfer_buffer is embedded
> + * in a bigger structure, there is a risk that the previous and following
> + * fields are left in a corrupted state by the DMA engine, if the platform
> + * is not cache coherent.
> */
> static inline void usb_fill_bulk_urb(struct urb *urb,
> struct usb_device *dev,
> @@ -1687,7 +1701,7 @@ static inline void usb_fill_bulk_urb(struct urb *urb,
> * @urb: pointer to the urb to initialize.
> * @dev: pointer to the struct usb_device for this urb.
> * @pipe: the endpoint pipe
> - * @transfer_buffer: pointer to the transfer buffer
> + * @transfer_buffer: pointer to the transfer buffer. Must be suitable for DMA.
> * @buffer_length: length of the transfer buffer
> * @complete_fn: pointer to the usb_complete_t function
> * @context: what to set the urb context to.
> @@ -1697,6 +1711,13 @@ static inline void usb_fill_bulk_urb(struct urb *urb,
> * Initializes a interrupt urb with the proper information needed to submit
> * it to a device.
> *
> + * The transfer buffer might be filled via DMA. The simplest way to get
> + * a buffer that can be DMAed to, is allocating it via kmalloc() or
> + * equivalent, even for very small buffers. If transfer_buffer is embedded
> + * in a bigger structure, there is a risk that the previous and following
> + * fields are left in a corrupted state by the DMA engine, if the platform
> + * is not cache coherent.
> + *
> * Note that High Speed and SuperSpeed(+) interrupt endpoints use a logarithmic
> * encoding of the endpoint interval, and express polling intervals in
> * microframes (eight per millisecond) rather than in frames (one per
>
> ---
> base-commit: b6bb9676f2165d518b35ba3bea5f1fcfc0d969bf
> change-id: 20221220-usb-dmadoc-29384acebd48
>
> Best regards,

--
~Randy

\
 
 \ /
  Last update: 2023-03-26 23:16    [W:0.048 / U:0.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site