lkml.org 
[lkml]   [2022]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/7] arm64: dts: qcom: sc8280xp: rename qup2_uart17 to uart17
Date
In preparation for adding the missing SPI and I2C nodes to
sc8280xp.dtsi, it was decided to rename all of the existing qupX_
uart, spi, and i2c nodes to drop the qupX_ prefix. Let's go ahead
and rename qup2_uart17 to uart17. Note that some nodes are moved in the
file by this patch to preserve the expected sort order in the file.

Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/lkml/20221212182314.1902632-1-bmasney@redhat.com/
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
Changes from v2 to v3:
- Add Konrad's R-b

Patch introduced in v2

arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 12 ++++++------
arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 12 ++++++------
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 14 +++++++-------
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 +-
4 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index 84cb6f3eeb56..61f2e44e70c1 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -17,7 +17,7 @@ / {
compatible = "qcom,sa8295p-adp", "qcom,sa8540p";

aliases {
- serial0 = &qup2_uart17;
+ serial0 = &uart17;
};

chosen {
@@ -240,11 +240,6 @@ &qup2 {
status = "okay";
};

-&qup2_uart17 {
- compatible = "qcom,geni-debug-uart";
- status = "okay";
-};
-
&remoteproc_adsp {
firmware-name = "qcom/sa8540p/adsp.mbn";
status = "okay";
@@ -338,6 +333,11 @@ pm8450g_gpios: gpio@c000 {
};
};

+&uart17 {
+ compatible = "qcom,geni-debug-uart";
+ status = "okay";
+};
+
&ufs_mem_hc {
reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;

diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
index 21f3ff024910..b6e0db5508c7 100644
--- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
@@ -17,7 +17,7 @@ / {
compatible = "qcom,sa8540p-ride", "qcom,sa8540p";

aliases {
- serial0 = &qup2_uart17;
+ serial0 = &uart17;
};

chosen {
@@ -192,11 +192,6 @@ &qup2 {
status = "okay";
};

-&qup2_uart17 {
- compatible = "qcom,geni-debug-uart";
- status = "okay";
-};
-
&remoteproc_nsp0 {
firmware-name = "qcom/sa8540p/cdsp.mbn";
status = "okay";
@@ -207,6 +202,11 @@ &remoteproc_nsp1 {
status = "okay";
};

+&uart17 {
+ compatible = "qcom,geni-debug-uart";
+ status = "okay";
+};
+
&ufs_mem_hc {
reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 551768f97729..db273face248 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -17,7 +17,7 @@ / {
compatible = "qcom,sc8280xp-crd", "qcom,sc8280xp";

aliases {
- serial0 = &qup2_uart17;
+ serial0 = &uart17;
};

backlight {
@@ -363,12 +363,6 @@ keyboard@68 {
};
};

-&qup2_uart17 {
- compatible = "qcom,geni-debug-uart";
-
- status = "okay";
-};
-
&remoteproc_adsp {
firmware-name = "qcom/sc8280xp/qcadsp8280.mbn";

@@ -381,6 +375,12 @@ &remoteproc_nsp0 {
status = "okay";
};

+&uart17 {
+ compatible = "qcom,geni-debug-uart";
+
+ status = "okay";
+};
+
&ufs_mem_hc {
reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 109c9d2b684d..951cb1b6fcc4 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -813,7 +813,7 @@ qup2: geniqup@8c0000 {

status = "disabled";

- qup2_uart17: serial@884000 {
+ uart17: serial@884000 {
compatible = "qcom,geni-uart";
reg = <0 0x00884000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
--
2.38.1
\
 
 \ /
  Last update: 2023-03-26 23:16    [W:0.138 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site