lkml.org 
[lkml]   [2022]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 1/3] ARM: dts: imx7d-remarkable2: Enable the cyttsp5
From
Hello Alistair,
Hello Marco,

On 20.12.22 14:20, Marco Felsch wrote:
> Hi Alistair,
>
> thanks for your patch, please see below.
>
> On 22-12-20, Alistair Francis wrote:
>> Add support for the cyttsp5 touchscreen controller for the reMarkable 2.
>>
>> Signed-off-by: Alistair Francis <alistair@alistair23.me>
>> ---
>> arch/arm/boot/dts/imx7d-remarkable2.dts | 98 +++++++++++++++++++++++++
>> 1 file changed, 98 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
>> index 8b2f11e85e05..a138b292ec6a 100644
>> --- a/arch/arm/boot/dts/imx7d-remarkable2.dts
>> +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
>> @@ -8,6 +8,7 @@
>> /dts-v1/;
>>
>> #include "imx7d.dtsi"
>> +#include <dt-bindings/input/linux-event-codes.h>
>>
>> / {
>> model = "reMarkable 2.0";
>> @@ -69,6 +70,18 @@ reg_digitizer: regulator-digitizer {
>> startup-delay-us = <100000>; /* 100 ms */
>> };
>>
>> + reg_touch: regulator-touch {
>> + compatible = "regulator-fixed";
>> + regulator-name = "VDD_3V3_TOUCH";
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-0 = <&pinctrl_touch_reg>;
>> + pinctrl-1 = <&pinctrl_touch_reg>;
>
> Why do we need a "sleep" state here?
>
>> + gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
>> + enable-active-high;
>> + };
>> +
>> wifi_pwrseq: wifi_pwrseq {
>> compatible = "mmc-pwrseq-simple";
>> pinctrl-names = "default";
>> @@ -106,6 +119,68 @@ wacom_digitizer: digitizer@9 {
>> };
>> };
>>
>> +&i2c3 {
>> + clock-frequency = <100000>;
>
> This can be set to 400kHz, the driver handle the quirks internal.

I would either leave this at 100kHz or increase to the maximum of
384 kHz. DT is supposed to describe the hardware and if 400 kHz
isn't a safe frequency, it should be avoided, even if the Linux
driver handles it gracefully.

Cheers,
Ahmad

>
> Regards,
> Marco
>
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_i2c3>;
>> + status = "okay";
>> +
>> + touchscreen@24 {
>> + compatible = "cypress,tt21000";
>> + reg = <0x24>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_touch>;
>> + interrupt-parent = <&gpio1>;
>> + interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
>> + reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
>> + vdd-supply = <&reg_touch>;
>> + touchscreen-size-x = <880>;
>> + touchscreen-size-y = <1280>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + button@0 {
>> + reg = <0>;
>> + linux,keycodes = <KEY_HOMEPAGE>;
>> + };
>> +
>> + button@1 {
>> + reg = <1>;
>> + linux,keycodes = <KEY_MENU>;
>> + };
>> +
>> + button@2 {
>> + reg = <2>;
>> + linux,keycodes = <KEY_BACK>;
>> + };
>> +
>> + button@3 {
>> + reg = <3>;
>> + linux,keycodes = <KEY_SEARCH>;
>> + };
>> +
>> + button@4 {
>> + reg = <4>;
>> + linux,keycodes = <KEY_VOLUMEDOWN>;
>> + };
>> +
>> + button@5 {
>> + reg = <5>;
>> + linux,keycodes = <KEY_VOLUMEUP>;
>> + };
>> +
>> + button@6 {
>> + reg = <6>;
>> + linux,keycodes = <KEY_CAMERA>;
>> + };
>> +
>> + button@7 {
>> + reg = <7>;
>> + linux,keycodes = <KEY_POWER>;
>> + };
>> + };
>> +};
>> +
>> &i2c4 {
>> clock-frequency = <100000>;
>> pinctrl-names = "default", "sleep";
>> @@ -232,6 +307,15 @@ MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x00000014
>> >;
>> };
>>
>> + pinctrl_touch: touchgrp {
>> + fsl,pins = <
>> + /* CYTTSP interrupt */
>> + MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x54
>> + /* CYTTSP reset */
>> + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x04
>> + >;
>> + };
>> +
>> pinctrl_i2c1: i2c1grp {
>> fsl,pins = <
>> MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
>> @@ -239,6 +323,13 @@ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
>> >;
>> };
>>
>> + pinctrl_i2c3: i2c3grp {
>> + fsl,pins = <
>> + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
>> + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
>> + >;
>> + };
>> +
>> pinctrl_i2c4: i2c4grp {
>> fsl,pins = <
>> MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f
>> @@ -246,6 +337,13 @@ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
>> >;
>> };
>>
>> + pinctrl_touch_reg: touchreggrp {
>> + fsl,pins = <
>> + /* TOUCH_PWR_EN */
>> + MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x14
>> + >;
>> + };
>> +
>> pinctrl_uart1: uart1grp {
>> fsl,pins = <
>> MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
>> --
>> 2.38.1
>>
>>
>>
>
>

--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

\
 
 \ /
  Last update: 2023-03-26 23:16    [W:0.078 / U:1.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site