lkml.org 
[lkml]   [2022]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes()
On Wed, Nov 30, 2022 at 12:37:15PM -0600, Eric W. Biederman wrote:
> Frederic Weisbecker <frederic@kernel.org> writes:
>
> > RCU Tasks and PID-namespace unshare can interact in do_exit() in a
> > complicated circular dependency:
> >
> > 1) TASK A calls unshare(CLONE_NEWPID), this creates a new PID namespace
> > that every subsequent child of TASK A will belong to. But TASK A
> > doesn't itself belong to that new PID namespace.
> >
> > 2) TASK A forks() and creates TASK B. TASK A stays attached to its PID
> > namespace (let's say PID_NS1) and TASK B is the first task belonging
> > to the new PID namespace created by unshare() (let's call it PID_NS2).
> >
> > 3) Since TASK B is the first task attached to PID_NS2, it becomes the
> > PID_NS2 child reaper.
> >
> > 4) TASK A forks() again and creates TASK C which get attached to PID_NS2.
> > Note how TASK C has TASK A as a parent (belonging to PID_NS1) but has
> > TASK B (belonging to PID_NS2) as a pid_namespace child_reaper.
> >
> > 5) TASK B exits and since it is the child reaper for PID_NS2, it has to
> > kill all other tasks attached to PID_NS2, and wait for all of them to
> > die before getting reaped itself (zap_pid_ns_process()).
> >
> > 6) TASK A calls synchronize_rcu_tasks() which leads to
> > synchronize_srcu(&tasks_rcu_exit_srcu).
> >
> > 7) TASK B is waiting for TASK C to get reaped. But TASK B is under a
> > tasks_rcu_exit_srcu SRCU critical section (exit_notify() is between
> > exit_tasks_rcu_start() and exit_tasks_rcu_finish()), blocking TASK A.
> >
> > 8) TASK C exits and since TASK A is its parent, it waits for it to reap
> > TASK C, but it can't because TASK A waits for TASK B that waits for
> > TASK C.
> >
> > Pid_namespace semantics can hardly be changed at this point. But the
> > coverage of tasks_rcu_exit_srcu can be reduced instead.
> >
> > The current task is assumed not to be concurrently reapable at this
> > stage of exit_notify() and therefore tasks_rcu_exit_srcu can be
> > temporarily relaxed without breaking its constraints, providing a way
> > out of the deadlock scenario.
> >
> > Fixes: 3f95aa81d265 ("rcu: Make TASKS_RCU handle tasks that are almost done exiting")
> > Reported-by: Pengfei Xu <pengfei.xu@intel.com>
> > Suggested-by: Boqun Feng <boqun.feng@gmail.com>
> > Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
> > Suggested-by: Paul E. McKenney <paulmck@kernel.org>
> > Cc: Oleg Nesterov <oleg@redhat.com>
> > Cc: Lai Jiangshan <jiangshanlai@gmail.com>
> > Cc: Eric W . Biederman <ebiederm@xmission.com>
> > Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
> > ---
> > include/linux/rcupdate.h | 2 ++
> > kernel/pid_namespace.c | 17 +++++++++++++++++
> > kernel/rcu/tasks.h | 14 ++++++++++++--
> > 3 files changed, 31 insertions(+), 2 deletions(-)
>
> > diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
> > index f4f8cb0435b4..fc21c5d5fd5d 100644
> > --- a/kernel/pid_namespace.c
> > +++ b/kernel/pid_namespace.c
> > @@ -244,7 +244,24 @@ void zap_pid_ns_processes(struct pid_namespace *pid_ns)
> > set_current_state(TASK_INTERRUPTIBLE);
> > if (pid_ns->pid_allocated == init_pids)
> > break;
> > + /*
> > + * Release tasks_rcu_exit_srcu to avoid following deadlock:
> > + *
> > + * 1) TASK A unshare(CLONE_NEWPID)
> > + * 2) TASK A fork() twice -> TASK B (child reaper for new ns)
> > + * and TASK C
> > + * 3) TASK B exits, kills TASK C, waits for TASK A to reap it
> > + * 4) TASK A calls synchronize_rcu_tasks()
> > + * -> synchronize_srcu(tasks_rcu_exit_srcu)
> > + * 5) *DEADLOCK*
> > + *
> > + * It is considered safe to release tasks_rcu_exit_srcu here
> > + * because we assume the current task can not be concurrently
> > + * reaped at this point.
> > + */
> > + exit_tasks_rcu_stop();
> > schedule();
> > + exit_tasks_rcu_start();
> > }
> > __set_current_state(TASK_RUNNING);
>
> Two questions.
>
> 1) Is there any chance you need the exit_task_rcu_stop() and
> exit_tasks_rcu_start() around schedule in the part of this code that
> calls kernel_wait4.

Quite possibly, but I must defer to Frederic on this one.

> 2) I keep thinking zap_pid_ns_processes() should be changed so that
> after it sends SIGKILL to all of the relevant processes to not wait,
> and instead have wait_consider_task simply not allow the
> init process of the pid namespace to be reaped.
>
> Am I right in thinking that such a change were to be made it would
> make remove the deadlock without having to have any special code?
>
> It is just tricky enough to do that I don't want to discourage your
> simpler change but this looks like a case that makes the pain of
> changing zap_pid_ns_processes worthwhile in the practice.

I would dearly love for there to be a fix that allowed the RCU-related
code to go back to what it was originally. But there is apparently some
concern that users might be relying on the current sleep-while-exiting
semantics. :-/

Thanx, Paul

\
 
 \ /
  Last update: 2022-12-02 20:52    [W:0.273 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site