lkml.org 
[lkml]   [2022]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 00/17] dt-bindings: soc: Introduce UniPhier miscellaneous register blocks and fix examples
From
Hi Rob,

On 2022/12/20 0:49, Rob Herring wrote:
> On Tue, Dec 13, 2022 at 05:24:32PM +0900, Kunihiko Hayashi wrote:
>> This series introduces dt-bindings documents for miscellaneous register
>> blocks implemented in Socionext UniPhier SoCs.
>>
>> These are previously defined in the devicetree and used in the examples
>> of subnodes' dt-bindings, however, not documented.
>>
>> These include two types of the blocks
>>
>> * independent block including miscellaneous registers and functions for
>> the whole SoC (system controller and SoC-glue logic)
>>
>> * sideband logic including control registers in the component (others)
>>
>> And prior to adding these dt-bindings, fix examples in the existing
>> dt-bindings.
>>
>> This series is part of the previous series shown below:
>>
> https://lore.kernel.org/linux-arm-kernel/20221107103410.3443-2-hayashi.kun
> ihiko@socionext.com
>>
>> Changes since v2:
>> - Drop redundant nodes in examples (clock, reset, soc-glue-debug)
>> - Drop parent node in examples
>> - Add more properties to examples for pinctrl
>> - Add a patch for regulator change
>> - Use consistent quotes
>> - Drop unit address patterns of patternProperties
>> - Mandatory unit address pattern for efuse (soc-glue-debug)
>> - Fix additionalProperties (ahci-glue)
>>
>> Changes since v1:
>> - Fix examples in the existing dt-bindings (Add PATCH 1-7)
>> - Add dt-bindings for SoC-glue logic debug part (Add PATCH 10)
>> - Drop generic and ld6b compatible strings
>> - Change "usb-controller" node in soc-glue to "usb-hub"
>> - Change "usb-controller" node in USB glue layer example to "usb"
>> - Add negation of child properties by compatible string
>>
>> Kunihiko Hayashi (17):
>> dt-bindings: clock: Fix node descriptions in uniphier-clock example
>> dt-bindings: reset: Fix node descriptions in uniphier-reset example
>> dt-bindings: pinctrl: Fix node descriptions in uniphier-pinctrl
>> example
>> dt-bindings: regulator: Fix node descriptions in uniphier-regulator
>> example
>> dt-bindings: watchdog: Fix node descriptions in uniphier-wdt example
>> dt-bindings: thermal: Fix node descriptions in uniphier-thermal
>> example
>> dt-bindings: phy: Fix node descriptions in uniphier-phy example
>> dt-bindings: nvmem: Fix node descriptions in uniphier-efuse example
>> dt-bindings: soc: socionext: Add UniPhier system controller
>> dt-bindings: soc: socionext: Add UniPhier SoC-glue logic
>> dt-bindings: soc: socionext: Add UniPhier SoC-glue logic debug part
>> dt-bindings: soc: socionext: Add UniPhier peripheral block
>> dt-bindings: soc: socionext: Add UniPhier media I/O block
>> dt-bindings: soc: socionext: Add UniPhier SD interface block
>> dt-bindings: soc: socionext: Add UniPhier ADAMV block
>> dt-bindings: soc: socionext: Add UniPhier DWC3 USB glue layer
>> dt-bindings: soc: socionext: Add UniPhier AHCI glue layer
>
> You sent this To me, so I'm assuming you want me to apply it?
> Otherwise, it can go via the Socionext tree. Let me know and I can fix
> up Krzysztof's comments and apply the series.

Currently I don't have the Socionext tree for pull-request,
so I'd be happy if you could fix up the comments and apply the series.

Thank you,

---
Best Regards
Kunihiko Hayashi

\
 
 \ /
  Last update: 2023-03-26 23:15    [W:0.236 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site