lkml.org 
[lkml]   [2022]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 10/11] arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes
On Mon, 5 Dec 2022 at 17:44, Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On 05/12/2022 18:37, Robert Foss wrote:
> > Enable the display subsystem and the dsi0 output for
> > the sm8350-hdk board.
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > ---
> > arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 22 ++++++++++++++++++++++
> > 1 file changed, 22 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> > index e6deb08c6da0..39462c659c58 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> > +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> > @@ -213,10 +213,32 @@ &cdsp {
> > firmware-name = "qcom/sm8350/cdsp.mbn";
> > };
> >
> > +&dispcc {
> > + status = "okay";
> > +};
> > +
> > +&dsi0 {
>
> Bjorn suggested using mdss_dsi0 / mdss_dsi0_phy labels for DSI host and
> PHY, as it allows us to group them nicely. WDYT?

Sounds quite reasonable, fixing it in dts/dtsi/binding.

>
> > + vdda-supply = <&vreg_l6b_1p2>;
> > + status = "okay";
> > +};
> > +
> > +&dsi0_phy {
> > + vdds-supply = <&vreg_l5b_0p88>;
> > + status = "okay";
> > +};
> > +
> > &gpi_dma1 {
> > status = "okay";
> > };
> >
> > +&mdss {
> > + status = "okay";
> > +};
> > +
> > +&mdss_mdp {
> > + status = "okay";
> > +};
> > +
> > &mpss {
> > status = "okay";
> > firmware-name = "qcom/sm8350/modem.mbn";
>
> --
> With best wishes
> Dmitry
>

\
 
 \ /
  Last update: 2022-12-19 17:13    [W:0.093 / U:0.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site