lkml.org 
[lkml]   [2022]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] mmc: sdhci-sprd: disable polling scan for sdio card
From
On 19/12/22 10:47, Wenchao Chen wrote:
> Enable polling will increase the power consumption of the host.
>
> Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
> Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
> ---
> drivers/mmc/host/sdhci-sprd.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
> index 525f979e2a97..113a5c77578f 100644
> --- a/drivers/mmc/host/sdhci-sprd.c
> +++ b/drivers/mmc/host/sdhci-sprd.c
> @@ -696,6 +696,10 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
> if (ret)
> goto err_cleanup_host;
>
> + if ((host->mmc->caps2 & MMC_CAP2_NO_SD) &&
> + (host->mmc->caps2 & MMC_CAP2_NO_MMC))
> + host->mmc->caps &= ~MMC_CAP_NEEDS_POLL;

How is MMC_CAP_NEEDS_POLL getting set? SDHCI won't set it for
non-removable cards. Is it removable?

> +
> pm_runtime_mark_last_busy(&pdev->dev);
> pm_runtime_put_autosuspend(&pdev->dev);
>

\
 
 \ /
  Last update: 2022-12-19 11:36    [W:0.042 / U:1.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site