lkml.org 
[lkml]   [2022]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 2/4] dt-bindings: phy: Document the Synopsys MIPI DPHY Rx bindings
On Fri, Dec 16, 2022 at 04:37:15PM +0200, Eugen Hristev wrote:
> From: Luis Oliveira <Luis.Oliveira@synopsys.com>
>
> Add device-tree bindings documentation for SNPS DesignWare MIPI D-PHY in
> RX mode.
>
> Signed-off-by: Luis Oliveira <luis.oliveira@synopsys.com>
> ---
> .../bindings/phy/snps,dw-dphy-rx.txt | 29 +++++++++++++++++++
> 1 file changed, 29 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/snps,dw-dphy-rx.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/snps,dw-dphy-rx.txt b/Documentation/devicetree/bindings/phy/snps,dw-dphy-rx.txt
> new file mode 100644
> index 000000000000..ffb64fe5cbd1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/snps,dw-dphy-rx.txt
> @@ -0,0 +1,29 @@
> +Synopsys DesignWare MIPI Rx D-PHY block details
> +
> +Description
> +-----------
> +
> +The Synopsys MIPI D-PHY controller supports MIPI-DPHY in receiver mode.
> +Please refer to phy-bindings.txt for more information.
> +
> +Required properties:
> +- compatible : Shall be "snps,dw-dphy-rx".
> +- #phy-cells : Must be 1.

There is more than 1 lane/phy for a single instance?

> +- bus-width : Size of the test interface data bus (8 bits->8 or
> + 12bits->12).

Do we need a test interface upstream?

If so, needs a vendor prefix.

> +- snps,dphy-frequency : Frequency at which D-PHY should start, configurable.
> + Check Synopsys databook. (-kHz)

Is this frequency of the link? We have properties for that. Or this
should somehow be using the clock binding.

And anything with units should have a unit suffix as defined in
property-units.yaml.

> +- reg : Test interface register. This correspondes to the
> + physical base address of the controller and size of
> + the device memory mapped registers; Check Synopsys
> + databook.
> +
> +Example:
> +
> + mipi_dphy_rx1: dphy@d00003040 {
> + compatible = "snps,dw-dphy-rx";
> + #phy-cells = <1>;
> + bus-width = <12>;
> + snps,dphy-frequency = <300000>;
> + reg = <0xd0003040 0x20>;
> + };
> --
> 2.25.1
>
>

\
 
 \ /
  Last update: 2022-12-17 00:43    [W:0.143 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site