Messages in this thread | | | Date | Fri, 16 Dec 2022 17:27:17 -0300 | Subject | Re: [PATCH v4 4/4] arm64: dts: qcom: sm6125: Initial support for xiaomi-laurel-sprout | From | Lux Aliaga <> |
| |
On 16/12/2022 08:32, Konrad Dybcio wrote: > > On 15.12.2022 20:04, Lux Aliaga wrote: >> Adds support for the Xiaomi Mi A3 (xiaomi-laurel-sprout). Here's a >> summary on what's working. >> >> - dmesg output to bootloader preconfigured display >> - USB >> - UFS >> - SMD RPM regulators >> >> Signed-off-by: Lux Aliaga <they@mint.lgbt> >> --- >> arch/arm64/boot/dts/qcom/Makefile | 1 + >> .../dts/qcom/sm6125-xiaomi-laurel-sprout.dts | 254 ++++++++++++++++++ >> 2 files changed, 255 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index 3e79496292e7..2b2a0170db14 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -157,6 +157,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb >> diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts >> new file mode 100644 >> index 000000000000..86e1ec47bf5e >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts >> @@ -0,0 +1,254 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) 2022, Lux Aliaga <they@mint.lgbt> >> + */ >> + >> +/dts-v1/; >> + >> +#include <dt-bindings/gpio/gpio.h> >> +#include <dt-bindings/input/input.h> >> +#include <dt-bindings/input/gpio-keys.h> >> +#include "sm6125.dtsi" >> + >> +/ { >> + model = "Xiaomi Mi A3"; >> + compatible = "xiaomi,laurel-sprout", "qcom,sm6125"; >> + chassis-type = "handset"; >> + >> + /* required for bootloader to select correct board */ >> + qcom,msm-id = <394 0>; /* sm6125 v0 */ > Unless you have a prototype device, this is not correct. > > Please run `cat /sys/bus/soc/devices/soc0/revision` and confirm > which revision is used on your phone. This segment has already been cross-referenced from downstream, and the device boots up successfully when using this ID, unless you're referring to the comment next to it, in which case I can recheck later, since currently I'm away from my device.
-- Lux Aliaga https://nixgoat.me/
| |