lkml.org 
[lkml]   [2022]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 3/3] ARM: dts: imx7d-remarkable2: Enable the rohm,bd71815
From
On 15/12/2022 12:56, Alistair Francis wrote:
> Add support for the rohm,bd71815 power controller controller for the
> reMarkable 2.

Thank you for your patch. There is something to discuss/improve.

>
> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> ---
> arch/arm/boot/dts/imx7d-remarkable2.dts | 158 ++++++++++++++++++++++++
> 1 file changed, 158 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
> index a138b292ec6a..e61ef3bd2eb9 100644
> --- a/arch/arm/boot/dts/imx7d-remarkable2.dts
> +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
> @@ -92,6 +92,10 @@ wifi_pwrseq: wifi_pwrseq {
> };
> };
>
> +&cpu0 {
> + cpu-supply = <&buck1_reg>;
> +};
> +
> &clks {
> assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
> <&clks IMX7D_CLKO2_ROOT_DIV>;
> @@ -119,6 +123,147 @@ wacom_digitizer: digitizer@9 {
> };
> };
>
> +&i2c2 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + pinctrl-1 = <&pinctrl_i2c2>;
> + status = "okay";
> +
> + bd71815: pmic@4b {
> + #clock-cells = <0>;

compatible and reg are usually first properties.

> +
> + compatible = "rohm,bd71815";
> + reg = <0x4b>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_bd71815>;
> + interrupt-parent = <&gpio6>; /* PMIC_INT_B GPIO6_IO16 */
> + interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&clks IMX7D_CLKO2_ROOT_SRC>;
> + clock-output-names = "bd71815-32k-out";
> +
> + regulators {
> + #address-cells = <1>;
> + #size-cells = <0>;

Does not look like you tested the DTS against bindings. Please run `make
dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
for instructions).
> +
> + buck1_reg: regulator@0 {
> + reg = <0>;
> + regulator-compatible = "buck1";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <1250>;
> + };
> +
> + buck2_reg: regulator@1 {
> + reg = <1>;
> + regulator-compatible = "buck2";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <1250>;
> + };
> +
> + buck3_reg: regulator@2 {
> + reg = <2>;
> + regulator-compatible = "buck3";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <2700000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + buck4_reg: regulator@3 {
> + reg = <3>;
> + regulator-compatible = "buck4";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1850000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + buck5_reg: regulator@4 {
> + reg = <4>;
> + regulator-compatible = "buck5";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo1_reg: regulator@5 {
> + reg = <5>;
> + regulator-compatible = "ldo1";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo2_reg: regulator@6 {
> + reg = <6>;
> + regulator-compatible = "ldo2";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo3_reg: regulator@7 {
> + reg = <7>;
> + regulator-compatible = "ldo3";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo4_reg: regulator@8 {
> + reg = <8>;
> + regulator-compatible = "ldo4";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo5_reg: regulator@9 {
> + reg = <9>;
> + regulator-compatible = "ldo5";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + dvref_reg: regulator@10 {
> + reg = <10>;

Aren't you now mixing hex and dec numbers?

> + regulator-compatible = "dvref";
> + regulator-boot-on;
> + regulator-always-on;
> + };
Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-12-16 11:57    [W:0.090 / U:0.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site