lkml.org 
[lkml]   [2022]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 5/5] powerpc: dts: remove label = "cpu" from DSA dt-binding
Date
Arınç ÜNAL <arinc.unal@arinc9.com> writes:
> This is not used by the DSA dt-binding, so remove it from all devicetrees.
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
> arch/powerpc/boot/dts/turris1x.dts | 2 --
> 1 file changed, 2 deletions(-)

Adding Pali to Cc.

These were only recently updated in commit:

8bf056f57f1d ("powerpc: dts: turris1x.dts: Fix labels in DSA cpu port nodes")

Which said:

DSA cpu port node has to be marked with "cpu" label.

But if the binding doesn't use them then I'm confused why they needed to
be updated.

cheers


> diff --git a/arch/powerpc/boot/dts/turris1x.dts b/arch/powerpc/boot/dts/turris1x.dts
> index 045af668e928..3841c8d96d00 100644
> --- a/arch/powerpc/boot/dts/turris1x.dts
> +++ b/arch/powerpc/boot/dts/turris1x.dts
> @@ -147,7 +147,6 @@ ports {
>
> port@0 {
> reg = <0>;
> - label = "cpu";
> ethernet = <&enet1>;
> phy-mode = "rgmii-id";
>
> @@ -184,7 +183,6 @@ port@5 {
>
> port@6 {
> reg = <6>;
> - label = "cpu";
> ethernet = <&enet0>;
> phy-mode = "rgmii-id";
>
> --
> 2.34.1

\
 
 \ /
  Last update: 2022-12-01 11:40    [W:0.189 / U:20.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site