lkml.org 
[lkml]   [2022]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFT PATCH v2 1/2] arm64: dts: qcom: sdm845-db845c: drop unneeded qup_spi0_default
Hi,

On Fri, Nov 18, 2022 at 8:42 AM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> The qup_spi0_default pin override is exactly the same as one already in
> sdm845.dtsi.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Cc: Doug Anderson <dianders@chromium.org>
>
> Changes since v1:
> 1. New patch.
> ---
> arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 8 --------
> 1 file changed, 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index 02dcf75c0745..56a7afb697ed 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -1274,11 +1274,3 @@ ov7251_ep: endpoint {
> };
> };
> };
> -
> -/* PINCTRL - additions to nodes defined in sdm845.dtsi */
> -&qup_spi0_default {
> - config {
> - drive-strength = <6>;
> - bias-disable;
> - };
> -};

I guess it's more of a question for what Bjorn thinks, but I view the
fact that the drive-strength / bias are in the dtsi file to begin with
as more as a bug in commit 8f6e20adaaf3 ("arm64: dts: qcom: sdm845:
enable dma for spi"), which is where these properties were introduced
to sdm845.dtsi.

The historical guidance from Bjorn was that things like
"drive-strength" and "bias" didn't belong in the SoC dtsi file. Later
we came to an agreement that it could be OK to put drive-strength in
the SoC dtsi file but that bias was still problematic because it meant
ugly "/delete-property/" stuff in the board dtsi files [1].

[1] https://lore.kernel.org/r/YnSQvyAN3v69an8k@ripper

\
 
 \ /
  Last update: 2022-12-02 01:50    [W:0.118 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site