lkml.org 
[lkml]   [2022]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 0/5] gpio: add suspend/resume support for i.mx8x SoCs
On Thu, Oct 27, 2022 at 3:09 PM Shenwei Wang <shenwei.wang@nxp.com> wrote:

> On i.MX8QM/QXP/DXL SoCs, even a GPIO is selected as the wakeup source,
> the GPIO block will be powered off when system enters into suspend
> state. This can greatly reduce the power consumption of suspend state
> because the whole partition can be shutdown. This is called PAD wakeup
> feature on i.MX8x platform.
>
> This series of patches enable this wakeup feature on i.MX8QM/QXP/DXL
> platforms.

First: thanks a lot for fixing this the way I wanted it!

> Shenwei Wang (5):
> arm64: dts: imx8dxl-ss-lsio: add gpio-ranges property
> arm64: dts: imx8qm-ss-lsio: add gpio-ranges property
> arm64: dts: imx8qxp-ss-lsio: add gpio-ranges property

Please push these into the SoC tree for i.MX.

> pinctrl: freescale: add pad wakeup config
> gpio: mxc: enable pad wakeup on i.MX8x platforms

I have applied these two to the pinctrl tree.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2022-11-08 11:29    [W:0.137 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site