lkml.org 
[lkml]   [2022]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 7/7] ARM: dts: imx: Update i.MXRT1050.dtsi compatibles
Date
Remove unused compatibles from i.MXRT1050.dtsi.
Change GPT clock-names to match documentation.

Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
---
arch/arm/boot/dts/imxrt1050.dtsi | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/imxrt1050.dtsi
index 03e6a858a7be..8d79de239046 100644
--- a/arch/arm/boot/dts/imxrt1050.dtsi
+++ b/arch/arm/boot/dts/imxrt1050.dtsi
@@ -29,7 +29,7 @@ osc3M: osc3M {

soc {
lpuart1: serial@40184000 {
- compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart";
+ compatible = "fsl,imxrt1050-lpuart";
reg = <0x40184000 0x4000>;
interrupts = <20>;
clocks = <&clks IMXRT1050_CLK_LPUART1>;
@@ -40,7 +40,6 @@ lpuart1: serial@40184000 {
iomuxc: pinctrl@401f8000 {
compatible = "fsl,imxrt1050-iomuxc";
reg = <0x401f8000 0x4000>;
- fsl,mux_mask = <0x7>;
};

anatop: anatop@400d8000 {
@@ -83,7 +82,7 @@ edma1: dma-controller@400e8000 {
};

usdhc1: mmc@402c0000 {
- compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc";
+ compatible = "fsl,imxrt1050-usdhc";
reg = <0x402c0000 0x4000>;
interrupts = <110>;
clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
@@ -150,11 +149,11 @@ gpio5: gpio@400c0000 {
};

gpt: timer@401ec000 {
- compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt";
+ compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt";
reg = <0x401ec000 0x4000>;
interrupts = <100>;
- clocks = <&osc3M>;
- clock-names = "per";
+ clocks = <&osc3M>, <&osc3M>;
+ clock-names = "ipg", "per";
};
};
};
--
2.37.2
\
 
 \ /
  Last update: 2022-11-07 08:17    [W:0.106 / U:0.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site