lkml.org 
[lkml]   [2022]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v8 08/11] tpm, tpm: Implement usage counter for locality
On Fri, Nov 04, 2022 at 05:18:21PM +0100, Lino Sanfilippo wrote:
>
>
> On 01.11.22 02:06, Jarkko Sakkinen wrote:
> > On Tue, Oct 25, 2022 at 02:15:51AM +0200, Lino Sanfilippo wrote:
>
> >> Actually thats on me, since it took me much too long to send the v8 after the v7 review.
> >>
> >> However the reason that we need a mutex here is that we not only increase or decrease
> >> the locality_counter under the mutex, but also do the locality request and release by
> >> writing to the ACCESS register. Since in the SPI case each communication over the spi bus
> >> is protected by the bus_lock_mutex of the SPI device we must not hold a spinlock when doing
> >> the register accesses.
> >>
> >> Concerning covering the whole tpm_tis_data struct:
> >> Most structure elements are set once at driver startup but never changed at driver
> >> runtime. So no locking needed for these. The only exception is "flags" and "locality_count"
> >> whereby "flags" is accessed by atomic bit manipulating functions and thus
> >> does not need extra locking. So "locality_count" is AFAICS the only element that needs to be
> >> protected by the mutex.
> >
> > OK, but you should should still address this in commit message, e.g.
> > by mentioning that in the case of SPI bus mutex is required because
> > the bus itself needs to be locked in the mutex.
> >
> > I.e. this a claim, definitely not an argument: "Ensure thread-safety by
> > protecting the counter with a mutex."
> >
>
> Ok, I will rephrase the commit message accordingly.
> Thanks for the review!

Yeah, np. I.e. I understand your reasoning but it is easy to intuitively
think it as not the right solution. Thus, it deserves a remark, right?
:-)

BR, Jarkko

\
 
 \ /
  Last update: 2022-11-07 17:05    [W:0.084 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site