lkml.org 
[lkml]   [2022]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 2/3] arm64: dts: qcom: Remove redundant soundwire property
From


On 07/11/2022 15:20, Srinivasa Rao Mandadapu wrote:
> Remove redundant property qcom,port-offset in soundwire
> controller nodes.
> This patch is required to avoid dtbs_check errors with
> qcom,soundwie.yaml
>
> Fixes: 12ef689f09ab ("arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs")
> Fixes: 24f52ef0c4bf ("arm64: dts: qcom: sm8250: Add nodes for tx and rx macros with soundwire masters")
>
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
> Co-developed-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com>
> Signed-off-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 1 -
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 1 -
> 2 files changed, 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 748eef6..71be873 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -2317,7 +2317,6 @@
> qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff>;
> qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff>;
> qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00>;
> - qcom,port-offset = <1>;
>
> #sound-dai-cells = <1>;
> #address-cells = <2>;
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index eb5a10c..0f430ca 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -2360,7 +2360,6 @@
> qcom,ports-word-length = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
> qcom,ports-block-group-count = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
> qcom,ports-lane-control = /bits/ 8 <0xFF 0x00 0x01 0x00 0x01>;
> - qcom,port-offset = <1>;
> #sound-dai-cells = <1>;
> #address-cells = <2>;
> #size-cells = <0>;

\
 
 \ /
  Last update: 2022-11-07 16:49    [W:0.086 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site