lkml.org 
[lkml]   [2022]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] PCI: dwc-host: Add a warning to prevent invalid values
Date
of_pci_get_max_link_speed() may return a negative value,
causing the controller to not set the speed correctly.
Add a warning in case the driver engineer misses it.

Signed-off-by: JunDong Song <jundongsong1@gmail.com>
---

When I use the pcie dwc driver, the controller speed is abnormal,
but it has not been detected because of the @max-link-speed error,
so I think I need to return an error or warning here.

Thanks.

drivers/pci/controller/dwc/pcie-designware-host.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 39f3b37d4..0103b9a63 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -429,8 +429,11 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
pp->io_base = pci_pio_to_address(win->res->start);
}

- if (pci->link_gen < 1)
+ if (pci->link_gen < 1) {
pci->link_gen = of_pci_get_max_link_speed(np);
+ if (unlikely(pci->link_gen < 0))
+ dev_warn(dev, "Failed to get max link speed\n");
+ }

/* Set default bus ops */
bridge->ops = &dw_pcie_ops;
--
2.25.1
\
 
 \ /
  Last update: 2022-11-07 16:33    [W:0.036 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site