lkml.org 
[lkml]   [2022]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RFC v3 2/7] ata: libata-scsi: Add ata_internal_queuecommand()
On 11/2/22 12:25, Damien Le Moal wrote:
> On 11/2/22 20:12, Hannes Reinecke wrote:
>> On 11/2/22 11:07, Damien Le Moal wrote:
>>> On 11/2/22 18:52, John Garry wrote:
>>>> Hi Damien,
>>>>
>> [ .. ] >> So we only need to find a way of 're-using' that tag, then we won't have
>> to set aside a reserved tag and everything would be dandy...
>
> I tried that. It is very ugly... Problem is that integration with EH in
> case a real NCQ error happens when all that read-log-complete dance is
> happening is hard. And don't get me started with the need to save/restore
> the scsi command context of the command we are reusing the tag from.
>
> And given that the code is changing to use regular submission path for
> internal commands, right now, we need a reserved tag. Or a way to "borrow"
> the tag from a request that we need to check. Which means we need some
> additional api to not always try to allocate a tag.
>
>>
>> Maybe we can stop processing when we receive an error (should be doing
>> that anyway as otherwise the log might be overwritten), then we should
>> be having a pretty good chance of getting that tag.
>
> Hmmm.... that would be no better than using EH which does stop processing
> until the internal house keeping is done.
>
>> Or, precisely, getting _any_ tag as at least one tag is free at that point.
>> Hmm?
>
> See above. Not free, but usable as far as the device is concerned since we
> have at least on command we need to check completed at the device level
> (but not yet completed from scsi/block layer point of view).
>
So, having had an entire weekend pondering this issue why don't we
allocate an _additional_ set of requests?
After all, we had been very generous with allocating queues and requests
(what with us doing a full provisioning of the requests for all queues
already for the non-shared tag case).

Idea would be to keep the single tag bitmap, but add eg a new rq state
MQ_RQ_ERROR. Once that flag is set we'll fetch the error request instead
of the normal one:

@@ -761,6 +763,8 @@ static inline struct request
*blk_mq_tag_to_rq(struct blk_mq_tags *tags,
{
if (tag < tags->nr_tags) {
prefetch(tags->rqs[tag]);
+ if (unlikely(blk_mq_request_error(tags->rqs[tag])))
+ return tags->error_rqs[tag];
return tags->rqs[tag];
}

and, of course, we would need to provision the error request first.

Rationale here is that this will be primarily for devices with a low
number of tags, so doubling the number of request isn't much of an
overhead (as we'll be doing it essentially anyway in the error case as
we'll have to save the original request _somewhere_), and that it would
remove quite some cruft from the subsystem; look at SCSI EH trying to
store the original request contents and then after EH restoring them again.

Hmm?

Cheers,

Hannes
--
Dr. Hannes Reinecke Kernel Storage Architect
hare@suse.de +49 911 74053 688
SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), GF: Felix Imendörffer

\
 
 \ /
  Last update: 2022-11-07 11:14    [W:0.091 / U:0.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site