lkml.org 
[lkml]   [2022]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH] usb: cdnsp: Fix issue with Clear Feature Halt Endpoint
Date
>
>On 22-10-26 05:37:10, Pawel Laszczak wrote:
>> During handling Clear Halt Endpoint Feature request driver invokes
>> Reset Endpoint command. Because this command has some issue with
>
>What are issues? Would you please explain more?

I don't know the internal behavior of controller. I know that there is the issue with resetting endpoint
in running state, resulting in the controller after rearming start handling incorrect TRB.

>
>> transition endpoint from Running to Idle state the driver must stop
>> the endpoint by using Stop Endpoint command.
>>
>> cc: <stable@vger.kernel.org>
>> Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence
>> USBSSP DRD Driver")
>> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
>> ---
>> drivers/usb/cdns3/cdnsp-gadget.c | 12 ++++--------
>> drivers/usb/cdns3/cdnsp-ring.c | 3 ++-
>> 2 files changed, 6 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/usb/cdns3/cdnsp-gadget.c
>> b/drivers/usb/cdns3/cdnsp-gadget.c
>> index e2e7d16f43f4..0576f9b0e4aa 100644
>> --- a/drivers/usb/cdns3/cdnsp-gadget.c
>> +++ b/drivers/usb/cdns3/cdnsp-gadget.c
>> @@ -600,11 +600,11 @@ int cdnsp_halt_endpoint(struct cdnsp_device
>> *pdev,
>>
>> trace_cdnsp_ep_halt(value ? "Set" : "Clear");
>>
>> - if (value) {
>> - ret = cdnsp_cmd_stop_ep(pdev, pep);
>> - if (ret)
>> - return ret;
>> + ret = cdnsp_cmd_stop_ep(pdev, pep);
>> + if (ret)
>> + return ret;
>>
>
>In your change ,it call cdnsp_cmd_stop_ep unconditionally, no matter set or
>clear halt? Is it your expectation? If it is, why?

No exactly unconditionally.

The below condition:
if (ep_state == EP_STATE_STOPPED || ep_state == EP_STATE_DISABLED
|| ep_state == EP_STATE_HALTED) {
goto ep_stopped;

Will decide whether command will be called or not.
It will be called only when endpoint is in RUNNING state.

Pawel

>
>> + if (value) {
>> if (GET_EP_CTX_STATE(pep->out_ctx) ==
>EP_STATE_STOPPED) {
>> cdnsp_queue_halt_endpoint(pdev, pep->idx);
>> cdnsp_ring_cmd_db(pdev);
>> @@ -613,10 +613,6 @@ int cdnsp_halt_endpoint(struct cdnsp_device
>> *pdev,
>>
>> pep->ep_state |= EP_HALTED;
>> } else {
>> - /*
>> - * In device mode driver can call reset endpoint command
>> - * from any endpoint state.
>> - */
>> cdnsp_queue_reset_ep(pdev, pep->idx);
>> cdnsp_ring_cmd_db(pdev);
>> ret = cdnsp_wait_for_cmd_compl(pdev); diff --git
>> a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c
>> index 25e5e51cf5a2..aa79bce89d8a 100644
>> --- a/drivers/usb/cdns3/cdnsp-ring.c
>> +++ b/drivers/usb/cdns3/cdnsp-ring.c
>> @@ -2081,7 +2081,8 @@ int cdnsp_cmd_stop_ep(struct cdnsp_device
>*pdev, struct cdnsp_ep *pep)
>> u32 ep_state = GET_EP_CTX_STATE(pep->out_ctx);
>> int ret = 0;
>>
>> - if (ep_state == EP_STATE_STOPPED || ep_state ==
>EP_STATE_DISABLED) {
>> + if (ep_state == EP_STATE_STOPPED || ep_state ==
>EP_STATE_DISABLED ||
>> + ep_state == EP_STATE_HALTED) {
>> trace_cdnsp_ep_stopped_or_disabled(pep->out_ctx);
>> goto ep_stopped;
>> }
>> --
>> 2.25.1
>>
>
>--
>
>Thanks,
>Peter Chen

Regards,
Pawel Laszczak

\
 
 \ /
  Last update: 2022-11-07 07:02    [W:0.262 / U:1.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site