lkml.org 
[lkml]   [2022]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[v2 2/2] dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid"
Date
The valid of the trimming data will use the otp default value as a
criterion.

Fixes: 2bdb2f00a895 ("dt-bindings: iio: adc: Add ast2600-adc bindings")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
.../devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml | 7 -------
1 file changed, 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
index b283c8ca2bbf..5c08d8b6e995 100644
--- a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
@@ -62,13 +62,6 @@ properties:
description:
Inform the driver that last channel will be used to sensor battery.

- aspeed,trim-data-valid:
- type: boolean
- description: |
- The ADC reference voltage can be calibrated to obtain the trimming
- data which will be stored in otp. This property informs the driver that
- the data store in the otp is valid.
-
required:
- compatible
- reg
--
2.25.1
\
 
 \ /
  Last update: 2022-11-07 10:16    [W:0.040 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site