lkml.org 
[lkml]   [2022]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/3] arm64: dts: renesas: r9a09g011: Fix unit address format error
On Fri, Nov 4, 2022 at 12:07 AM Fabrizio Castro
<fabrizio.castro.jz@renesas.com> wrote:
> Although the HW User Manual for RZ/V2M states in the "Address Map"
> section that the interrupt controller is assigned addresses starting
> from 0x82000000, the memory locations from 0x82000000 0x0x8200FFFF
> are marked as reserved in the "Interrupt Controller (GIC)" section
> and are currently not used by the device tree, leading to the below
> warning:
>
> arch/arm64/boot/dts/renesas/r9a09g011.dtsi:51.38-63.5: Warning
> (simple_bus_reg): /soc/interrupt-controller@82000000: simple-bus unit
> address format error, expected "82010000"
>
> Fix the unit address accordingly.
>
> Fixes: fb1929b98f2e ("arm64: dts: renesas: Add initial DTSI for RZ/V2M SoC")
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v6.2.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

\
 
 \ /
  Last update: 2022-11-04 09:47    [W:0.066 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site