lkml.org 
[lkml]   [2022]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v8 05/13] x86/resctrl: Detect and configure Slow Memory Bandwidth Allocation
From
Hi Reinette,

On 11/22/22 18:12, Reinette Chatre wrote:
> Hi Babu,
>
> On 11/4/2022 1:00 PM, Babu Moger wrote:
>> The QoS slow memory configuration details are available via
>> CPUID_Fn80000020_EDX_x02. Detect the available details and
>> initialize the rest to defaults.
>>
>> Signed-off-by: Babu Moger <babu.moger@amd.com>
>> ---
>> arch/x86/kernel/cpu/resctrl/core.c | 36 +++++++++++++++++++++++++++--
>> arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 2 +-
>> arch/x86/kernel/cpu/resctrl/internal.h | 1 +
>> arch/x86/kernel/cpu/resctrl/rdtgroup.c | 8 ++++--
>> 4 files changed, 41 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
>> index e31c98e2fafc..6571d08e2b0d 100644
>> --- a/arch/x86/kernel/cpu/resctrl/core.c
>> +++ b/arch/x86/kernel/cpu/resctrl/core.c
>> @@ -162,6 +162,13 @@ bool is_mba_sc(struct rdt_resource *r)
>> if (!r)
>> return rdt_resources_all[RDT_RESOURCE_MBA].r_resctrl.membw.mba_sc;
>>
>> + /*
>> + * The software controller support is only applicable to MBA resource.
>> + * Make sure to check for resource type again.
>> + */
> /again/d
>
> Not all callers of is_mba_sc() check if it is called for an MBA resource.
>
>> + if (r->rid != RDT_RESOURCE_MBA)
>> + return false;
>> +
>> return r->membw.mba_sc;
>> }
>>
>> @@ -225,9 +232,15 @@ static bool __rdt_get_mem_config_amd(struct rdt_resource *r)
>> struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
>> union cpuid_0x10_3_eax eax;
>> union cpuid_0x10_x_edx edx;
>> - u32 ebx, ecx;
>> + u32 ebx, ecx, subleaf;
>>
>> - cpuid_count(0x80000020, 1, &eax.full, &ebx, &ecx, &edx.full);
>> + /*
>> + * Query CPUID_Fn80000020_EDX_x01 for MBA and
>> + * CPUID_Fn80000020_EDX_x02 for SMBA
>> + */
>> + subleaf = (r->rid == RDT_RESOURCE_SMBA) ? 2 : 1;
>> +
>> + cpuid_count(0x80000020, subleaf, &eax.full, &ebx, &ecx, &edx.full);
>> hw_res->num_closid = edx.split.cos_max + 1;
>> r->default_ctrl = MAX_MBA_BW_AMD;
>>
>> @@ -750,6 +763,19 @@ static __init bool get_mem_config(void)
>> return false;
>> }
>>
>> +static __init bool get_slow_mem_config(void)
>> +{
>> + struct rdt_hw_resource *hw_res = &rdt_resources_all[RDT_RESOURCE_SMBA];
>> +
>> + if (!rdt_cpu_has(X86_FEATURE_SMBA))
>> + return false;
>> +
>> + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
>> + return __rdt_get_mem_config_amd(&hw_res->r_resctrl);
>> +
>> + return false;
>> +}
>> +
>> static __init bool get_rdt_alloc_resources(void)
>> {
>> struct rdt_resource *r;
>> @@ -780,6 +806,9 @@ static __init bool get_rdt_alloc_resources(void)
>> if (get_mem_config())
>> ret = true;
>>
>> + if (get_slow_mem_config())
>> + ret = true;
>> +
>> return ret;
>> }
>>
>> @@ -869,6 +898,9 @@ static __init void rdt_init_res_defs_amd(void)
>> } else if (r->rid == RDT_RESOURCE_MBA) {
>> hw_res->msr_base = MSR_IA32_MBA_BW_BASE;
>> hw_res->msr_update = mba_wrmsr_amd;
>> + } else if (r->rid == RDT_RESOURCE_SMBA) {
>> + hw_res->msr_base = MSR_IA32_SMBA_BW_BASE;
>> + hw_res->msr_update = mba_wrmsr_amd;
>> }
>> }
>> }
> I mentioned earlier that this can be moved to init of
> rdt_resources_all[]. No strong preference, leaving here works
> also.

I am little confused about this comment. Initialization of
rdt_resources_all in core.c is mostly generic initialization. The msr_base
and msr_update routines here are vendor specific. I would prefer to keep
this in

rdt_init_res_defs_amd.Is that ok?

Thanks
Babu


\
 
 \ /
  Last update: 2022-11-30 19:44    [W:0.120 / U:1.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site