lkml.org 
[lkml]   [2022]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/4] hwmon: (pmbus/core): Update regulator flag map
On Wed, Nov 30, 2022 at 05:58:29PM +0100, Naresh Solanki wrote:
> Add regulator flag map for PMBUS status byte & status input.
>

Now you lost me. Two 1/4 patches with overlapping and different
content ???

Guenter

> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> ---
> drivers/hwmon/pmbus/pmbus_core.c | 30 ++++++++++++++++++++++--------
> 1 file changed, 22 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
> index 95e95783972a..f5caceaaef2a 100644
> --- a/drivers/hwmon/pmbus/pmbus_core.c
> +++ b/drivers/hwmon/pmbus/pmbus_core.c
> @@ -2752,6 +2752,15 @@ struct pmbus_regulator_status_category {
>
> static const struct pmbus_regulator_status_category pmbus_regulator_flag_map[] = {
> {
> + .func = -1,
> + .reg = PMBUS_STATUS_BYTE,
> + .bits = (const struct pmbus_regulator_status_assoc[]) {
> + { PB_STATUS_IOUT_OC, REGULATOR_ERROR_OVER_CURRENT },
> + { PB_STATUS_VOUT_OV, REGULATOR_ERROR_REGULATION_OUT },
> + { PB_STATUS_VIN_UV, REGULATOR_ERROR_UNDER_VOLTAGE },
> + { },
> + },
> + }, {
> .func = PMBUS_HAVE_STATUS_VOUT,
> .reg = PMBUS_STATUS_VOUT,
> .bits = (const struct pmbus_regulator_status_assoc[]) {
> @@ -2768,6 +2777,7 @@ static const struct pmbus_regulator_status_category pmbus_regulator_flag_map[] =
> { PB_IOUT_OC_WARNING, REGULATOR_ERROR_OVER_CURRENT_WARN },
> { PB_IOUT_OC_FAULT, REGULATOR_ERROR_OVER_CURRENT },
> { PB_IOUT_OC_LV_FAULT, REGULATOR_ERROR_OVER_CURRENT },
> + { PB_POUT_OP_FAULT, REGULATOR_ERROR_OVER_CURRENT },
> { },
> },
> }, {
> @@ -2778,6 +2788,18 @@ static const struct pmbus_regulator_status_category pmbus_regulator_flag_map[] =
> { PB_TEMP_OT_FAULT, REGULATOR_ERROR_OVER_TEMP },
> { },
> },
> + }, {
> + .func = PMBUS_HAVE_STATUS_INPUT,
> + .reg = PMBUS_STATUS_INPUT,
> + .bits = (const struct pmbus_regulator_status_assoc[]) {
> + { PB_IIN_OC_FAULT, REGULATOR_ERROR_OVER_CURRENT },
> + { PB_IIN_OC_WARNING, REGULATOR_ERROR_OVER_CURRENT_WARN },
> + { PB_VOLTAGE_UV_FAULT, REGULATOR_ERROR_UNDER_VOLTAGE },
> + { PB_VOLTAGE_UV_WARNING, REGULATOR_ERROR_UNDER_VOLTAGE_WARN },
> + { PB_VOLTAGE_OV_WARNING, REGULATOR_ERROR_OVER_VOLTAGE_WARN },
> + { PB_VOLTAGE_OV_FAULT, REGULATOR_ERROR_OVER_VOLTAGE_WARN },
> + { },
> + },
> },
> };
>
> @@ -2834,14 +2856,6 @@ static int pmbus_regulator_get_error_flags(struct regulator_dev *rdev, unsigned
> if (status & PB_STATUS_POWER_GOOD_N)
> *flags |= REGULATOR_ERROR_REGULATION_OUT;
> }
> - /*
> - * Unlike most other status bits, PB_STATUS_{IOUT_OC,VOUT_OV} are
> - * defined strictly as fault indicators (not warnings).
> - */
> - if (status & PB_STATUS_IOUT_OC)
> - *flags |= REGULATOR_ERROR_OVER_CURRENT;
> - if (status & PB_STATUS_VOUT_OV)
> - *flags |= REGULATOR_ERROR_REGULATION_OUT;
>
> /*
> * If we haven't discovered any thermal faults or warnings via
>
> base-commit: 9494c53e1389b120ba461899207ac8a3aab2632c
> --
> 2.37.3
>

\
 
 \ /
  Last update: 2022-11-30 19:09    [W:0.151 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site