lkml.org 
[lkml]   [2022]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 04/12] arm64: dts: qcom: sm6115: Add TSENS node
From


On 29.11.2022 21:46, Adam Skladowski wrote:
> Add nodes required for TSENS block using the common qcom,tsens-v2 binding.
>
> Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> arch/arm64/boot/dts/qcom/sm6115.dtsi | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 2003a2519a54..decbf7ca8a03 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -515,6 +515,17 @@ spmi_bus: spmi@1c40000 {
> #interrupt-cells = <4>;
> };
>
> + tsens0: thermal-sensor@4410000 {
> + compatible = "qcom,sm6115-tsens", "qcom,tsens-v2";
> + reg = <0x04411000 0x1ff>, /* TM */
> + <0x04410000 0x8>; /* SROT */
> + #qcom,sensors = <16>;
> + interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "uplow", "critical";
> + #thermal-sensor-cells = <1>;
> + };
> +
> rpm_msg_ram: sram@45f0000 {
> compatible = "qcom,rpm-msg-ram";
> reg = <0x045f0000 0x7000>;

\
 
 \ /
  Last update: 2022-11-30 12:18    [W:0.078 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site