lkml.org 
[lkml]   [2022]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 3/8] dt-bindings: soc: socionext: Add UniPhier peripheral block
From
Hi Krzysztof,

On 2022/11/29 23:46, Krzysztof Kozlowski wrote:
> On 29/11/2022 11:35, Kunihiko Hayashi wrote:
>> Add devicetree binding schema for the peripheral block implemented on
>> Socionext Uniphier SoCs.
>>
>> Peripheral block implemented on Socionext UniPhier SoCs is an integrated
>> component of the peripherals including UART, I2C/FI2C, and SCSSI.
>>
>> Peripheral block has some function logics to control the component.
>>
>> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
>> ---
>> .../socionext,uniphier-perictrl.yaml | 67 +++++++++++++++++++
>> 1 file changed, 67 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml
>>
>> diff --git
>> a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml
>> b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml
>> new file mode 100644
>> index 000000000000..080b6ab3ea1a
>> --- /dev/null
>> +++
>> b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml
>> @@ -0,0 +1,67 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id:
>> http://devicetree.org/schemas/soc/socionext/socionext,uniphier-perictrl.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Socionext UniPhier peripheral block controller
>> +
>> +maintainers:
>> + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
>> +
>> +description: |+
>> + Peripheral block implemented on Socionext UniPhier SoCs is an
>> integrated
>> + component of the peripherals including UART, I2C/FI2C, and SCSSI.
>> + Peripheral block controller is a logic to control the component.
>> +
>> +properties:
>> + compatible:
>> + items:
>> + - enum:
>> + - socionext,uniphier-ld4-perictrl
>> + - socionext,uniphier-pro4-perictrl
>> + - socionext,uniphier-pro5-perictrl
>> + - socionext,uniphier-pxs2-perictrl
>> + - socionext,uniphier-ld6b-perictrl
>> + - socionext,uniphier-sld8-perictrl
>> + - socionext,uniphier-ld11-perictrl
>> + - socionext,uniphier-ld20-perictrl
>> + - socionext,uniphier-pxs3-perictrl
>> + - socionext,uniphier-nx1-perictrl
>> + - socionext,uniphier-perictrl
>> + - const: simple-mfd
>> + - const: syscon
>> +
>> + reg:
>> + maxItems: 1
>> +
>> +patternProperties:
>> + "^clock-controller(@[0-9a-f]+)?$":
>> + $ref: /schemas/clock/socionext,uniphier-clock.yaml#
>> +
>> + "^reset-controller(@[0-9a-f]+)?$":
>> + $ref: /schemas/reset/socionext,uniphier-reset.yaml#
>> +
>> +required:
>> + - compatible
>> + - reg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + syscon@59820000 {
>> + compatible = "socionext,uniphier-ld20-perictrl",
>> + "simple-mfd", "syscon";
>> + reg = <0x59820000 0x200>;
>> +
>> + clock-controller {
>
> None of your children in examples and in DTS have unit addresses.
> However you explicitly mentioned them in the patternProperties. Do you
> expect adding unit addresses?

Currently, children's registers are partially mixed and it's hard
to specify the unit address.

The address pattern was added as option for the future, however,
not needed for the current implementation. I'll remove them in next.

Thank you,

---
Best Regards
Kunihiko Hayashi

\
 
 \ /
  Last update: 2022-11-30 10:02    [W:0.080 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site