lkml.org 
[lkml]   [2022]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH v6 1/4] arm64: dts: qcom: add data-lanes and link-freuencies into dp_out endpoint
From
On 01/12/2022 02:07, Dmitry Baryshkov wrote:
> On 01/12/2022 01:51, Kuogee Hsieh wrote:
>> Move data-lanes property from mdss_dp node to dp_out endpoint. Also
>> add link-frequencies property into dp_out endpoint as well. The last
>> frequency specified at link-frequencies will be the max link rate
>> supported by DP.
>>
>> Changes in v5:
>> -- revert changes at sc7180.dtsi and sc7280.dtsi
>> -- add &dp_out to sc7180-trogdor.dtsi and sc7280-herobrine.dtsi
>>
>> Changes in v6:
>> -- add data-lanes and link-frequencies to yaml
>>
>> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
>> ---
>>   .../devicetree/bindings/display/msm/dp-controller.yaml  | 17
>> +++++++++++++++++
>
> Separate patch. Also you didn't check the get_maintainers output, so
> required parties were not included into the distribution.
>
> Also as you'd check the get_maintainers output, please fix other email
> addresses too.
>
>>   arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi            |  6 +++++-
>>   arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi          |  6 +++++-
>>   3 files changed, 27 insertions(+), 2 deletions(-)
>>
>> diff --git
>> a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>> b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>> index 94bc6e1..af70343 100644
>> --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>> +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>> @@ -90,6 +90,20 @@ properties:
>>           $ref: /schemas/graph.yaml#/properties/port
>>           description: Output endpoint of the controller
>> +        properties:
>> +          endpoint:
>> +            $ref: /schemas/media/video-interfaces.yaml#
>> +
>> +          properties:
>> +            link-frequencies: true
>> +            data-lanes: true
>
> No. Use $ref for both of them.
>
>> +
>> +          required:
>> +            - link-frequencies
>> +            - data-lanes
>
> No, they are not required.
>
>> +
>> +          additionalProperties: false
>> +
>
> deprecation of old data-lanes property?
>
>>   required:
>>     - compatible
>>     - reg
>> @@ -158,6 +172,9 @@ examples:
>>                   reg = <1>;
>>                   endpoint {
>>                       remote-endpoint = <&typec>;
>> +                    data-lanes = <1 2>;
>> +                    link-frequencies = /bits/ 64 <160000000 270000000

s/1600/1620

>> +                                                  540000000 810000000>;
>
> I guess the number of zeroes is wrong here. This is 160 MHz ... 810 Mhz,
> rather than 1.6 GHz ... 8.1 GHz

Ok, I was wrong here. The old code definitely defaults to 570
mega-something. Now I'd really like to read your description for the
link-frequencies property, because the phy_configure_opts_dp::link_rate
is clearly specified in Mb/s and it takes a fixed set of values from
1.62 Gb/s up to 8.1 Gb/s.

I think the drm_dp_bw_code_to_link_rate() function is incorrect by
itself, as it multiplies with 27000 (27 Mbps) rather than 270000 (0.27
Gbps) as required by the standard. So first, we should fix the function,
then all the rates would become logical.


>
>>                   };
>>               };
>>           };
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> index 754d2d6..39f0844 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> @@ -812,7 +812,11 @@ hp_i2c: &i2c9 {
>>       status = "okay";
>>       pinctrl-names = "default";
>>       pinctrl-0 = <&dp_hot_plug_det>;
>> -    data-lanes = <0 1>;
>> +};
>> +
>> +&dp_out {
>> +    data-lanes = <0  1>;
>> +    link-frequencies = /bits/ 64 <160000000 270000000 540000000>;
>
> Same comment here.
>
>>   };
>>   &pm6150_adc {
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>> b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>> index 93e39fc..b7c343d 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>> @@ -440,7 +440,11 @@ ap_i2c_tpm: &i2c14 {
>>       status = "okay";
>>       pinctrl-names = "default";
>>       pinctrl-0 = <&dp_hot_plug_det>;
>> -    data-lanes = <0 1>;
>> +};
>> +
>> +&dp_out {
>> +    data-lanes = <0  1>;
>> +    link-frequencies = /bits/ 64 <160000000 270000000 540000000
>> 810000000>;
>
> And here.
>
>>   };
>>   &mdss_mdp {
>

--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2022-12-01 01:22    [W:0.090 / U:3.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site