lkml.org 
[lkml]   [2022]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2 1/9] octeon_ep: defer probe if firmware not ready
Date
Defer probe if firmware is not ready for device usage.

Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
---
v1 -> v2:
* was scheduling workqueue task to wait for firmware ready,
to probe/initialize the device.
* now, removed the workqueue task; the probe returns EPROBE_DEFER,
if firmware is not ready.
* removed device status oct->status, as it is not required with the
modified implementation.

.../ethernet/marvell/octeon_ep/octep_main.c | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)

diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
index 5a898fb88e37..aa7d0ced9807 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
@@ -1017,6 +1017,25 @@ static void octep_device_cleanup(struct octep_device *oct)
oct->conf = NULL;
}

+static u8 get_fw_ready_status(struct pci_dev *pdev)
+{
+ u32 pos = 0;
+ u16 vsec_id;
+ u8 status;
+
+ while ((pos = pci_find_next_ext_capability(pdev, pos,
+ PCI_EXT_CAP_ID_VNDR))) {
+ pci_read_config_word(pdev, pos + 4, &vsec_id);
+#define FW_STATUS_VSEC_ID 0xA3
+ if (vsec_id == FW_STATUS_VSEC_ID) {
+ pci_read_config_byte(pdev, (pos + 8), &status);
+ dev_info(&pdev->dev, "Firmware ready %u\n", status);
+ return status;
+ }
+ }
+ return 0;
+}
+
/**
* octep_probe() - Octeon PCI device probe handler.
*
@@ -1053,6 +1072,13 @@ static int octep_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_enable_pcie_error_reporting(pdev);
pci_set_master(pdev);

+#define FW_STATUS_READY 1
+ if (get_fw_ready_status(pdev) != FW_STATUS_READY) {
+ dev_notice(&pdev->dev, "Firmware not ready; defer probe.\n");
+ err = -EPROBE_DEFER;
+ goto err_alloc_netdev;
+ }
+
netdev = alloc_etherdev_mq(sizeof(struct octep_device),
OCTEP_MAX_QUEUES);
if (!netdev) {
--
2.36.0
\
 
 \ /
  Last update: 2022-11-29 14:11    [W:0.121 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site