lkml.org 
[lkml]   [2022]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4] dt-bindings: leds: Document commonly used LED triggers
On Tue, Nov 29, 2022 at 11:49 AM Manivannan Sadhasivam
<manivannan.sadhasivam@linaro.org> wrote:
>
> Document the commonly used LED triggers by the SoCs. Not all triggers
> are documented as some of them are very application specific. Most of the
> triggers documented here are currently used in devicetrees of many SoCs.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>
> Changes in v4:
>
> * Removed the sorting of triggers
> * Removed the "items" as they were not needed
> * Reworded the description
> * Dropped Zhen Lei's tested-by tag as the patch has changed
> * Added kbd-capslock trigger
>
> Changes in v3:
>
> * Rebased on top of v6.1-rc1
> * Added WLAN Rx trigger
> * Added tested tag from Zhen Lei
>
> Changes in v2:
>
> * Added more triggers, fixed the regex
> * Sorted triggers in ascending order
>
> .../devicetree/bindings/leds/common.yaml | 40 ++++++++++++++++++-
> 1 file changed, 38 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
> index 3c14a98430e1..68da651f29a8 100644
> --- a/Documentation/devicetree/bindings/leds/common.yaml
> +++ b/Documentation/devicetree/bindings/leds/common.yaml
> @@ -98,8 +98,44 @@ properties:
> # LED alters the brightness for the specified duration with one software
> # timer (requires "led-pattern" property)
> - pattern
> - # LED is triggered by SD/MMC activity
> - - pattern: "^mmc[0-9]+$"
> + # LED indicates mic mute state
> + - audio-micmute
> + # LED indicates audio mute state
> + - audio-mute
> + # LED indicates bluetooth power state
> + - bluetooth-power
> + # LED indicates activity of all CPUs
> + - cpu
> + # LED indicates disk read activity
> + - disk-read
> + # LED indicates disk write activity
> + - disk-write
> + # LED indicates camera flash state
> + - flash
> + # LED indicated keyboard capslock
> + - kbd-capslock
> + # LED indicates MTD memory activity
> + - mtd
> + # LED indicates NAND memory activity (deprecated),
> + # in new implementations use "mtd"
> + - nand-disk
> + # No trigger assigned to the LED. This is the default mode
> + # if trigger is absent
> + - none
> + # LED indicates camera torch state
> + - torch
> + # LED indicates USB gadget activity
> + - usb-gadget
> + # LED indicates USB host activity
> + - usb-host
> + # LED indicates [N]th MMC storage activity
> + - pattern: "^mmc[0-9]{1,2}$"
> + # LED indicates activity of [N]th CPU
> + - pattern: "^cpu[0-9]{1,2}$"

This will conflict with Pawel's tree because I already added this.
Mine covers 'cpu' and my 100 core system with 100 cpu leds. ;)

> + # LED indicates power status of [N]th Bluetooth HCI device
> + - pattern: "^hci[0-9]{1,2}-power$"
> + # LED indicates [N]th WLAN Tx/Rx activity
> + - pattern: "^phy[0-9]{1,2}(tx|rx)$"

And these are pending from Geert[1].

Rob

[1] https://lore.kernel.org/all/a85c256af01f64389a078c2b37c3b72a27d97536.1668005062.git.geert+renesas@glider.be/

\
 
 \ /
  Last update: 2022-11-30 01:36    [W:0.106 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site