lkml.org 
[lkml]   [2022]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] ARM: dts: sti: align LED node names with dtschema
From
Hi Krzysztof 

On 11/25/22 15:41, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern:
>
> stih407-b2120.dtb: leds: 'green', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> arch/arm/boot/dts/stih410-b2260.dts | 8 ++++----
> arch/arm/boot/dts/stih418-b2199.dts | 4 ++--
> arch/arm/boot/dts/stih418-b2264.dts | 2 +-
> arch/arm/boot/dts/stihxxx-b2120.dtsi | 4 ++--
> 4 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
> index 26d93f26f6d0..240b62040000 100644
> --- a/arch/arm/boot/dts/stih410-b2260.dts
> +++ b/arch/arm/boot/dts/stih410-b2260.dts
> @@ -27,26 +27,26 @@ aliases {
>
> leds {
> compatible = "gpio-leds";
> - user_green_1 {
> + led-user-green-1 {
> label = "User_green_1";
> gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
> linux,default-trigger = "heartbeat";
> default-state = "off";
> };
>
> - user_green_2 {
> + led-user-green-2 {
> label = "User_green_2";
> gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
> default-state = "off";
> };
>
> - user_green_3 {
> + led-user-green-3 {
> label = "User_green_3";
> gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
> default-state = "off";
> };
>
> - user_green_4 {
> + led-user-green-4 {
> label = "User_green_4";
> gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
> default-state = "off";
> diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
> index d21bcc7c1271..53ac6c2b7b7d 100644
> --- a/arch/arm/boot/dts/stih418-b2199.dts
> +++ b/arch/arm/boot/dts/stih418-b2199.dts
> @@ -26,12 +26,12 @@ aliases {
>
> leds {
> compatible = "gpio-leds";
> - red {
> + led-red {
> label = "Front Panel LED";
> gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "heartbeat";
> };
> - green {
> + led-green {
> gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
> diff --git a/arch/arm/boot/dts/stih418-b2264.dts b/arch/arm/boot/dts/stih418-b2264.dts
> index a99604bebf8c..34a518b037ab 100644
> --- a/arch/arm/boot/dts/stih418-b2264.dts
> +++ b/arch/arm/boot/dts/stih418-b2264.dts
> @@ -76,7 +76,7 @@ aliases {
> soc {
> leds {
> compatible = "gpio-leds";
> - green {
> + led-green {
> gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
> diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> index 2aa94605d3d4..920a0bad7494 100644
> --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
> +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> @@ -9,12 +9,12 @@
> / {
> leds {
> compatible = "gpio-leds";
> - red {
> + led-red {
> label = "Front Panel LED";
> gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "heartbeat";
> };
> - green {
> + led-green {
> gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks
Patrice

\
 
 \ /
  Last update: 2022-11-28 09:32    [W:2.395 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site