lkml.org 
[lkml]   [2022]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 net-next 02/10] dt-bindings: net: dsa: qca8k: remove address-cells and size-cells from switch node
Date
The children of the switch node don't have a unit address, and therefore
should not need the #address-cells or #size-cells entries. Fix the example
schemas accordingly.

Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
---

v3
* New patch

---
Documentation/devicetree/bindings/net/dsa/qca8k.yaml | 4 ----
1 file changed, 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index 978162df51f7..6fc9bc985726 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -148,8 +148,6 @@ examples:

switch@10 {
compatible = "qca,qca8337";
- #address-cells = <1>;
- #size-cells = <0>;
reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
reg = <0x10>;

@@ -209,8 +207,6 @@ examples:

switch@10 {
compatible = "qca,qca8337";
- #address-cells = <1>;
- #size-cells = <0>;
reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
reg = <0x10>;

--
2.25.1
\
 
 \ /
  Last update: 2022-11-27 23:48    [W:0.458 / U:4.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site