Messages in this thread | | | Date | Sat, 26 Nov 2022 16:16:57 +0100 | Subject | Re: [PATCH 03/30] irqchip: Use kstrtobool() instead of strtobool() | From | Christophe JAILLET <> |
| |
Le 26/11/2022 à 13:46, Marc Zyngier a écrit : > On Tue, 01 Nov 2022 21:13:51 +0000, > Christophe JAILLET <christophe.jaillet@wanadoo.fr> wrote: >> >> strtobool() is the same as kstrtobool(). >> However, the latter is more used within the kernel. >> >> In order to remove strtobool() and slightly simplify kstrtox.h, switch to >> the other function name. >> >> While at it, include the corresponding header file (<linux/kstrtox.h>) >> >> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> >> --- >> This patch is part of a serie that axes all usages of strtobool(). >> Each patch can be applied independently from the other ones. >> >> The last patch of the serie removes the definition of strtobool(). >> >> You may not be in copy of the cover letter. So, if needed, it is available >> at [1]. >> >> >> This patch has NOT been compile tested. > > Thanks for having the honesty to state that this hasn't been even > compile tested. However, and for fairly obvious reason, I will not > take such patches.
Ok, so, with a sucessful: sudo apt install libc6-armel-cross libc6-dev-armel-cross binutils-arm-linux-gnueabi libncurses5-dev build-essential bison flex libssl-dev bc sudo apt install gcc-arm-linux-gnueabi g++-arm-linux-gnueabi
make ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- -j7 allmodconfig
patch -p1 < strtobool.diff
make ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- -j7 ./drivers/irqchip/irq-gic.o make ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- -j7 ./drivers/irqchip/irq-gic-v3.o
can I make you change your mind?
CJ
> > Thanks, > > M. >
| |