lkml.org 
[lkml]   [2022]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 2/4] drm/tiny: Read separate I/O regulator from DT
Some platforms have a separate vddi supply for the panel I/O interface
(as defined by the MIPI DBI specification), so one power-supply is not
enough. Introduce a new "io-supply" property to set the vddi regulator.

After getting the regulator specified the device tree, use the new
io_regulator property of the DBI device so that the drm_mipi_dbi driver
can enable it.

Signed-off-by: Otto Pflüger <affenull2345@gmail.com>
---
drivers/gpu/drm/tiny/panel-mipi-dbi.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/tiny/panel-mipi-dbi.c
b/drivers/gpu/drm/tiny/panel-mipi-dbi.c
index 03a7d569cd56..b09d2a47a409 100644
--- a/drivers/gpu/drm/tiny/panel-mipi-dbi.c
+++ b/drivers/gpu/drm/tiny/panel-mipi-dbi.c
@@ -297,6 +297,11 @@ static int panel_mipi_dbi_spi_probe(struct
spi_device *spi)
return dev_err_probe(dev, PTR_ERR(dbidev->regulator),
"Failed to get regulator 'power'\n");

+ dbidev->io_regulator = devm_regulator_get(dev, "io");
+ if (IS_ERR(dbidev->io_regulator))
+ return dev_err_probe(dev, PTR_ERR(dbidev->io_regulator),
+ "Failed to get regulator 'io'\n");
+
dbidev->backlight = devm_of_find_backlight(dev);
if (IS_ERR(dbidev->backlight))
return dev_err_probe(dev, PTR_ERR(dbidev->backlight), "Failed to get
backlight\n");
--
2.30.2
\
 
 \ /
  Last update: 2022-11-25 18:45    [W:5.685 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site