lkml.org 
[lkml]   [2022]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v6] hwmon: (pmbus/core): Implement regulator get_status
From


On 25-11-2022 09:21 pm, Guenter Roeck wrote:
> On Thu, Nov 24, 2022 at 08:36:42PM +0100, Naresh Solanki wrote:
>> From: Patrick Rudolph <patrick.rudolph@9elements.com>
>>
>> Add get_status for pmbus_regulator_ops.
>> ---
>
> Adding "---" into the commit description causes everything afterwards
> to get lost when applying the patch, including the signatures.
> I fixed it up and applied it, but please don't do that in the future.
Sure. Thanks
>
> Guenter
>
>> Changes:
>> - use lock throughout the function
>> - Avoid line continuation upto 100 column
>> - Optimize use of & and | operator
>> - Check for VOUT, IOUT, TEMPERATURE bit in status word before checking
>> respective status register for fault.
>> - Report regulator current status.
>> - Utilize get_error_flag to check for regulator errors.
>> - Check for return value of function get_error_flag
>> - Use function pmbus_regulator_get_error_flags directly
>>
>> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
>> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
>> ---
>> drivers/hwmon/pmbus/pmbus_core.c | 44 ++++++++++++++++++++++++++++++++
>> 1 file changed, 44 insertions(+)
>>
>>
>> base-commit: 2c71b3246ec3246522e8cb7c8191dc7a5d62cc70
>>
>> diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
>> index 20ca26e19db7..95e95783972a 100644
>> --- a/drivers/hwmon/pmbus/pmbus_core.c
>> +++ b/drivers/hwmon/pmbus/pmbus_core.c
>> @@ -2855,6 +2855,49 @@ static int pmbus_regulator_get_error_flags(struct regulator_dev *rdev, unsigned
>> return 0;
>> }
>>
>> +static int pmbus_regulator_get_status(struct regulator_dev *rdev)
>> +{
>> + struct device *dev = rdev_get_dev(rdev);
>> + struct i2c_client *client = to_i2c_client(dev->parent);
>> + struct pmbus_data *data = i2c_get_clientdata(client);
>> + u8 page = rdev_get_id(rdev);
>> + int status, ret;
>> +
>> + mutex_lock(&data->update_lock);
>> + status = pmbus_get_status(client, page, PMBUS_STATUS_WORD);
>> + if (status < 0) {
>> + ret = status;
>> + goto unlock;
>> + }
>> +
>> + if (status & PB_STATUS_OFF) {
>> + ret = REGULATOR_STATUS_OFF;
>> + goto unlock;
>> + }
>> +
>> + /* If regulator is ON & reports power good then return ON */
>> + if (!(status & PB_STATUS_POWER_GOOD_N)) {
>> + ret = REGULATOR_STATUS_ON;
>> + goto unlock;
>> + }
>> +
>> + ret = pmbus_regulator_get_error_flags(rdev, &status);
>> + if (ret)
>> + goto unlock;
>> +
>> + if (status & (REGULATOR_ERROR_UNDER_VOLTAGE | REGULATOR_ERROR_OVER_CURRENT |
>> + REGULATOR_ERROR_REGULATION_OUT | REGULATOR_ERROR_FAIL | REGULATOR_ERROR_OVER_TEMP)) {
>> + ret = REGULATOR_STATUS_ERROR;
>> + goto unlock;
>> + }
>> +
>> + ret = REGULATOR_STATUS_UNDEFINED;
>> +
>> +unlock:
>> + mutex_unlock(&data->update_lock);
>> + return ret;
>> +}
>> +
>> static int pmbus_regulator_get_low_margin(struct i2c_client *client, int page)
>> {
>> struct pmbus_data *data = i2c_get_clientdata(client);
>> @@ -2995,6 +3038,7 @@ const struct regulator_ops pmbus_regulator_ops = {
>> .disable = pmbus_regulator_disable,
>> .is_enabled = pmbus_regulator_is_enabled,
>> .get_error_flags = pmbus_regulator_get_error_flags,
>> + .get_status = pmbus_regulator_get_status,
>> .get_voltage = pmbus_regulator_get_voltage,
>> .set_voltage = pmbus_regulator_set_voltage,
>> .list_voltage = pmbus_regulator_list_voltage,

Naresh

\
 
 \ /
  Last update: 2022-11-25 16:55    [W:0.048 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site