lkml.org 
[lkml]   [2022]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2] can: sja1000: plx_pci: fix error handling path in plx_pci_add_card()
On 25.11.2022 21:46:14, Zhang Changzhong wrote:
> If pci_iomap() or register_sja1000dev() fails, netdev will not be
> registered, but plx_pci_del_card() still deregisters the netdev.
>
> To avoid this, let's free the netdev and clear card->net_dev[i] before
> calling plx_pci_del_card(). In addition, add the missing pci_iounmap()
> when the channel does not exist.
>
> Compile tested only.
>
> Fixes: 951f2f960e5b ("drivers/net/can/sja1000/plx_pci.c: eliminate double free")
> Fixes: 24c4a3b29255 ("can: add support for CAN interface cards based on the PLX90xx PCI bridge")
> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
> ---
> v1->v2: switch to goto style fix.
>
> drivers/net/can/sja1000/plx_pci.c | 10 ++++++++--
> 1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c
> index 5de1ebb..134a8cb 100644
> --- a/drivers/net/can/sja1000/plx_pci.c
> +++ b/drivers/net/can/sja1000/plx_pci.c
> @@ -678,7 +678,7 @@ static int plx_pci_add_card(struct pci_dev *pdev,
> if (!addr) {
> err = -ENOMEM;
> dev_err(&pdev->dev, "Failed to remap BAR%d\n", cm->bar);
> - goto failure_cleanup;
> + goto failure_free_dev;
> }
>
> priv->reg_base = addr + cm->offset;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> @@ -699,7 +699,7 @@ static int plx_pci_add_card(struct pci_dev *pdev,
> if (err) {
> dev_err(&pdev->dev, "Registering device failed "
> "(err=%d)\n", err);
> - goto failure_cleanup;
> + goto failure_iounmap;
> }
>
> card->channels++;
> @@ -710,6 +710,7 @@ static int plx_pci_add_card(struct pci_dev *pdev,
> } else {
> dev_err(&pdev->dev, "Channel #%d not detected\n",
> i + 1);
> + pci_iounmap(pdev, priv->reg_base);
> free_sja1000dev(dev);
> card->net_dev[i] = NULL;
> }
> @@ -738,6 +739,11 @@ static int plx_pci_add_card(struct pci_dev *pdev,
> }
> return 0;
>
> +failure_iounmap:
> + pci_iounmap(pdev, priv->reg_base);
^^^^^^^^^^^^^^

reg_base it not that what has been mapped, but with an offset.

> +failure_free_dev:
> + free_sja1000dev(dev);
> + card->net_dev[i] = NULL;
> failure_cleanup:
> dev_err(&pdev->dev, "Error: %d. Cleaning Up.\n", err);

Marc

--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-11-25 15:14    [W:0.063 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site